Cris Log

Thur. 5 Jun. 2014

• Uploaded File:CEBPressSolenoidAssembly.skp
• Uploaded uncorrupted File:CEB Press 6 Fabrication Drawings.zip
• Got dimensions of Solenoid Assembly Hydraulic connections for updating of CAD models see photos of actual assembly
• Created schematic of Solenoid Assembly with Hydraulic Connectors in google presentation
• Created Lasersaur_Exterior_Panel_Installation to document current status of Lasersaur exterior panel installation
• Helped Organize workshop
• Disassembled solenoid valve assembly and began cleaning/degreasing components in preparation for reassembly

Wed. 4 Jun. 2014

• Started documenting CEB 6 Solenoid Assembly Manual
• Uploaded File:SolenoidAssembly.FCStd
• Removed Solenoid Assembly from old Brick Press for updating FreeCAD model & for cleaning/degunking
• Reassembled CEB Press with a team [CEB Press]

Tues. 3 Jun 2014

• Documented problems encountered during Lasersaur Exterior Panel Installation
• Started Workshop reorganize and fixed some power tool plugs and extension cord ends.
• Worked with a team to reassemble the CEB Press. Learned it is important to have a CAD model that matches the actual model. Also good to replace nuts and washers onto corresponding bolts while disassembling in order to simplify reassembly.

Mon. 2 Jun 2014

• Sketchup practice
• CEB Press 6 - Drawer Guides - Build Instructions
• Started Mounting Lasersaur CNC Laser Cover Plates: need to drill additional holes as per Lasersaur Manual
• Edited Lasersaur CAD model to include dimensions and location of panel holes [1],[2],[3],[4],[5],[6]

Sat. 31 May 2014

• Finalized prep for OSE
• Installed software recommended in DPV Offer Letter