3 Inch Wheel Hub: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=Designs= | =Designs= | ||
==Sketchup Download== | |||
See [https://3dwarehouse.sketchup.com/model.html?id=u0b8f509c-d2d8-4d7b-bf02-371a034c86a4 Google Warehouse] | |||
<html><iframe src="https://3dwarehouse.sketchup.com/embed.html?mid=u0b8f509c-d2d8-4d7b-bf02-371a034c86a4&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300" allowfullscreen></iframe></html> | |||
==Version 3== | ==Version 3== | ||
[[File:WheelHub3.png]] | [[File:WheelHub3.png]] | ||
Revision as of 20:39, 30 June 2015
Designs
Sketchup Download
See Google Warehouse
Version 3
File:Modified9inchWheelHub.dxf
Version 2
Version 1
Background Information
Sat Jun 22, 2013
DXF file - File:WheelHub V3.dxf
to do
still needs "standard truck bolt holes"
references
http://www.mrt-wheels.com/boltpatternref.html
Fri Jun 21, 2013
Note: this will be attached to the wheel from Monica Log
- Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.:
Design Rationale 1
- Take a very thick keyed coupler - say start with 3" solid coupler, 1/2" keyway
- Slit it in half
- Weld tabs on it for the 3/4" bolt hole
- Weld one half of the keyed coupler into the rest of the metal wheel
Ok, I'll try something following this--Nottern link (talk) 06:08, 16 June 2013 (CEST)
Samples to Build From
