Power Cube Troubleshooting Instructions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Requirements: #Air #Electricity #Fuel #Get a voltmeter to test battery. Is it 12.6? #If battery is below 12.6, you need to charge. #Check if solenoid is working. If there i...") |
No edit summary |
||
| Line 10: | Line 10: | ||
#Check if solenoid is working. If there is an audible single click, then solenoid is working. If there is a continuous set of clicks, that means battery is low voltage or there is a loose connection. | #Check if solenoid is working. If there is an audible single click, then solenoid is working. If there is a continuous set of clicks, that means battery is low voltage or there is a loose connection. | ||
#Check connections. Touch the battery terminals one at a time, and the lugs should not be able to be moved. | #Check connections. Touch the battery terminals one at a time, and the lugs should not be able to be moved. | ||
#Any loose connection will make failure. So check next the battery connection to solenoid. Then check the 2 bolts tightened connection between solenoid and starter. | |||
#Check ground. That means the negative of battery is solidly connected to the frame. | |||
Revision as of 14:46, 1 September 2014
Requirements:
- Air
- Electricity
- Fuel
- Get a voltmeter to test battery. Is it 12.6?
- If battery is below 12.6, you need to charge.
- Check if solenoid is working. If there is an audible single click, then solenoid is working. If there is a continuous set of clicks, that means battery is low voltage or there is a loose connection.
- Check connections. Touch the battery terminals one at a time, and the lugs should not be able to be moved.
- Any loose connection will make failure. So check next the battery connection to solenoid. Then check the 2 bolts tightened connection between solenoid and starter.
- Check ground. That means the negative of battery is solidly connected to the frame.