Tobben Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 8: Line 8:
#[[Torbjorn DEF Agreement]].  DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
#[[Torbjorn DEF Agreement]].  DEF=Distributive Enterprise Fellow, under the [[EIR]] program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
#Locking in design requirements - [[D3D Requirements]] - both overall and module by module
#Locking in design requirements - [[D3D Requirements]] - both overall and module by module
#Defining the 'story' for the thesis
#Defining the 'story' for the thesis. [[D3D Thesis Story]].
#Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module
#Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module



Revision as of 20:26, 23 December 2015

Torbjorn CV

Dec 23, 2015

Wrote something on the D3D Printer design. D3D_Fusion_Printer_Design Needs to be fitted into a template.

Dec 22, 2015

Work on visa application process. Skype meeting with Marcin. Discussion points:

  1. Torbjorn DEF Agreement. DEF=Distributive Enterprise Fellow, under the EIR program. Including workshop schedule and number, and your tentative arrival date, and details regarding your university.
  2. Locking in design requirements - D3D Requirements - both overall and module by module
  3. Defining the 'story' for the thesis. D3D Thesis Story.
  4. Beginning discussion on the tech tree of choices that we select to move forward - meaning specific implementation path for each module

Found some data: [1] Nice discussion on hangout, got some text produced from it: [2]

Asked for data on RepRap Freenode IRC chat. Generated discussion about Prusa i3 Steel. Didn't read it all, so putting it here for future reference: Cut_From_Freenode_RepRap_22_Dec

Dec 21, 2015

Initiated Project Plan D3D_Fusion_project_plan. This is what Martin must approve before we can move on. Made thesis skeleton D3D_Fusion_thesis#Thesis_Skeleton from template in course documentation. Limited progress in FreeCAD.

Dec 19, 2015

Commented proposed D3D requirements: Talk:D3D_Requirements. Added Lyman extruder to Open_Source_Filament_Extruders. See Power Tool Construction Set.

Dec 16, 2015

Presented some 3d printer design ideas in D3D_Fusion_printer_design.

Dec 15, 2015

Summarized short research about prior work of Prusa: D3D_Fusion_thesis#Earlier_Work

Sun Dec 13, 2015

Wrote short comparison between DE norms and science norms.

Thu Dec 10, 2015

Initiated D3D_Fusion_thesis sketch. Also did a little overview on Large_Scale_Fused_Pellet_Fabrication. Got an overview of the MOST lab's work. Put in in D3D_Fusion_thesis.

Sun Dec 6, 2015

Initiated this work log. Initiated D3D Fusion. Initiated D3D dev spreadsheed [3]. Nice. Please embed spreadsheet in wiki.-MJ Embedding Done