Prusa i3 Development: Difference between revisions
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
*Review - [https://www.youtube.com/watch?v=bVyRrsc8X50] - calibration is a definite issue. | *Review - [https://www.youtube.com/watch?v=bVyRrsc8X50] - calibration is a definite issue. | ||
==Build Time== | |||
*12 hour build time - [https://www.youtube.com/watch?v=mdzsJycdSAo] | |||
=Process= | =Process= | ||
Revision as of 21:52, 20 January 2016
Folgertech Kit
Kit sells for under $300:
- Review - [1] - calibration is a definite issue.
Build Time
- 12 hour build time - [2]
Process
- Forum message - what's the Best Workshop Kit for a 3D printer workshop? 1 day build workshop, as high quality as possible.
- Prusa i3 from Folgertech encouraged.
- SD card or wireless - what additional cost is there?
- We identify the kit
FreeCAD Files
- See search - [3]
Selection
Original Work
- Version used in Prusa workshops - see Readme for source - [4]. Her is the source for the workshop model. [5].
Links
Sourcing with Shipping
- Under $350 for full kit, shipping is 3-5 days - [8]. Uses J Head Nozzle. Ships "i3 rework" design: [9]
Sourcing Issues
- According to [12] - cheap chinese J Head counterfeits do not work - so make sure the hot end works
- J Head exists from the original manufacturer - $56 - but shipping is a flat rate. Takes 48 hours to ship, but shipping method is unspecified. Need to contact seller to see if they can provide fast shipping.
Communication
- Josef (Prusa),
We will be doing a Prusa i3 workshop March 19.
1. Can you share some of your expertise in running workshops - do you have your process documented anywhere?
2. Which source of the Prusa i3 do you recommend as the best version to use for a workshop?
3. Are you in a position to/ interested in coming to the USA to run a workshop with OSE?
Marcin