D3D Inventory: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Unpacking= | =Unpacking= | ||
It took 10 hours to unpack 12 [[Folgertech | It took 10 hours to unpack 12 [[Folgertech Kit]]s: | ||
#Separate bolts by size | #Separate bolts by size | ||
Revision as of 22:31, 17 March 2016
Unpacking
It took 10 hours to unpack 12 Folgertech Kits:
- Separate bolts by size
- Separate every part by one of 10 Modules as at Prusa i3 Build Optimization
Further Prep
- Put set screws into L brackets (24 set screws per machine)
- Separate aluminum beams and unwrap, then tape together into a bunch
- Take bags off all aluminum bushing blocks
- Put on jumpers onto controller boards
- Put on stepper drivers onto controllers
- Bend up the transistors on stepper drivers
- Take backing off all plexiglas