MK8 Nozzle: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
{{Hint|MK8 1.75mm nozzle works with 3 mm filament on the Lulzbot Mini. Even though the hole is <3mm by the threads, melted 3mm filament has no problem going through the nozzle. Great for parts interoperability}} | |||
=1.75 mm Filament Nozzle= | =1.75 mm Filament Nozzle= | ||
*0.8 mm nozzle aperture | *0.8 mm nozzle aperture | ||
*M6x1 thread | *M6x1 thread | ||
*Source - [http://www.robotdigg.com/product/33/MK8-0.4mm-Nozzle] | *Source - [http://www.robotdigg.com/product/33/MK8-0.4mm-Nozzle] | ||
*This source [http://www.ebay.com/itm/132113515791?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT] worked with Lulzbot Mini Hexagon hot end | |||
[[Image:mk8nozzle8.png|600px]] | [[Image:mk8nozzle8.png|600px]] | ||
Revision as of 04:51, 23 April 2017
Hint: MK8 1.75mm nozzle works with 3 mm filament on the Lulzbot Mini. Even though the hole is <3mm by the threads, melted 3mm filament has no problem going through the nozzle. Great for parts interoperability
1.75 mm Filament Nozzle
- 0.8 mm nozzle aperture
- M6x1 thread
- Source - [1]
- This source [2] worked with Lulzbot Mini Hexagon hot end
