Lyman Filament Extruder

BOM

Embed a Google Spreadsheet BOM -

Working Document

edit

About

http://www.shapeways.com/blog/archives/1973-the-lyman-filament-extruder-may-drop-the-cost-of-desktop-3d-printing-forever.html

Communications

Marcin,

Your work appears to be very interesting.

I don't visualize my being involved in your workshop as I am now 87 years old living in Enumclaw, Washington.

My latest Filament Extruder, Version 6 is the only extruder I am now supporting. It is my favorite extruder and all my filament is now produced with the three I have made. It extrudes 3mm (2.65mm) filament at about 1/2 lb/hour with the gear motor running at 25 rpm. The motor is rated for 33 rpm but under load it only goes about 25. . A faster gear motor with about 100 kg-cm of torque may give 1 lb/hr. I get a filament that varies not more than .05mm with the extruder wall mounted.

This extruder is posted on Thingiverse and is open source CC share alike. The posting includes a BOM. Also there is a video on YouTube.

Hugh Lyman

Technical

• Uses 173 kg-cm torque motor (150 lb in) , but a 10 lb-in stepper (2 nema 17, 80 oz-in motors) reduced 10x may be sufficient (so still can use small, cheap steppers, no more than $20 in stepper motor costs. Advantage is that we are introducing no new parts to the GVCS, as steppers are already used.

Links

Hint: Build PDFs for Extruder v6 and Spooler v3 from Hugh Lyman is in the zipped folder, inside the Files folder

• Lyman Filament Extruder Part Library
• Thingiverse - v6 - http://www.thingiverse.com/thing:1199870. Download BOM + files (backup in case if Thingiverse goes south) - File:Lymanv6.zip
• Comments on Thingiverse provide some useful details.
• Spool winder v3, Jan 2016 - [1]. Download - File:Lymanspoolerv3.zip