CEB Press Part Library: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 8: Line 8:
=Introduction=
=Introduction=
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:
*'''Parts''' - for building Modules, for producing Fabrication Drawings
*'''Parts''' - for building Modules, Sub-assemblies and for producing Fabrication Drawings
*'''Modules''' - Made of multiple parts, these are sub-assemblies of the Final Assemlby. These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Modules''' - Made of multiple parts, usually used in Sub-assemblies. Modules are used when there is repeated assembly of same or similar parts (like the legs). These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Sub-assemblies''' The major components of the final CAD. used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Final Assembly''' - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''Simplified Assets''': Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.  
*'''File Size Requirements''' - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.  
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''File Organization''' - Spreadsheet of all Assets (both Simlified and Complete assets) is available
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file.
*'''Construction Best Practices''' - procedures for effective part building in FreeCAD are followed for each file. Each part should be designed at the origin, so symmetries can assist in the design.  
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.
*'''File Build Documentation''' - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.


*'''Constraints'''All the modules and Sub-assemblies are constrained without any Degrees Of Freedom.
{{Hint|Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which includes a drag-and-drop of every part within FreeCAD}}


{{Hint|Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which includes a drag-and-drop of every part within FreeCAD}}
=Index=
=Index=
[[CEB_Press#Master_Index]]
[[CEB_Press#Master_Index]]

Revision as of 01:28, 4 August 2017

THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE

I am creating this doc for the design sprint on Saturday July 22 @10:55 MST as per slide #2 of the sprint document @ [1] - Dixon

Ceb2016.jpg

Introduction

Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:

  • Parts - for building Modules, Sub-assemblies and for producing Fabrication Drawings
  • Modules - Made of multiple parts, usually used in Sub-assemblies. Modules are used when there is repeated assembly of same or similar parts (like the legs). These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Sub-assemblies The major components of the final CAD. used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Final Assembly - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
  • Simplified Assets: Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
  • File Size Requirements - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
  • File Organization - Spreadsheet of all Assets (both Simlified and Complete assets) is available
  • Construction Best Practices - procedures for effective part building in FreeCAD are followed for each file. Each part should be designed at the origin, so symmetries can assist in the design.
  • File Build Documentation - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.
  • ConstraintsAll the modules and Sub-assemblies are constrained without any Degrees Of Freedom.


HintLightbulb.png Hint: Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which includes a drag-and-drop of every part within FreeCAD

Index

CEB_Press#Master_Index

Master File

Index:

Embed index

Parts Gallery

Drawer

Rod Holder

File:Rod holder.fcstd File:Rod holder.stl

Front Compression Chamber Cover Plate

Frame


Mid Plates

Module 4

Module 6

Module 7

Module 8

Assembled Modules Gallery

Final Assembly Gallery

Simplified Assets Gallery

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_Part_Library&oldid=156852"