Revision as of 04:24, 23 August 2017

Welding

Test all welders according to Welders Check Protocol. Replace liner if needed. Inventory spools, tips,
Welding masks - check if they darken; put broken ones back on shelves, mark them as broken. Check lens covers, replace as needed. Clear visibility but dark should be the norm. If can't see clearly, need to replace.
Organize drills and charging stations
Dismantle brick press
Buff CEB press metal
Paint CEB press metal
Inventory grinders
Inventory bolts
Get 2 more acetylene bottles and 1 oxygen
Get last materials - battry, press foot, pin, as by CAD
Cut and weld cylinder
Inventory old materials - grate etc
Lay out hydraulic parts
Lay out bolts
Set up weld tables
Make press foot spacers, 5.5x11.5"
Cut 7" rebar reinforcements
Bring hoist over
Fire up tractor

@@ Line 1: / Line 1: @@
 =Welding=
-*[[Welders Check Protocol]]
+#Test all welders according to [[Welders Check Protocol]]. Replace liner if needed. Inventory spools, tips,
-*Welding masks - check if they darken; put broken ones back on shelves, mark them as broken. Check lens covers, replace as needed. Clear visibility but dark should be the norm. If can't see clearly, need to replace.
+#Welding masks - check if they darken; put broken ones back on shelves, mark them as broken. Check lens covers, replace as needed. Clear visibility but dark should be the norm. If can't see clearly, need to replace.
+#Organize drills and charging stations
+#Dismantle brick press
+#Buff CEB press metal
+#Paint CEB press metal
+#Inventory grinders
+#Inventory bolts
+#Get 2 more acetylene bottles and 1 oxygen
+#Get last materials - battry, press foot, pin, as by CAD
+#'''Cut and weld cylinder'''
+#Inventory old materials - grate etc
+#Lay out hydraulic parts
+#Lay out bolts
+#Set up weld tables
+#Make press foot spacers, 5.5x11.5"
+#Cut 7" rebar reinforcements
+#Bring hoist over
+#Fire up tractor
 =Torching=
 *Strikers in good shape
 *4 torch sets functional; bottles full; tips clean
-*