D3D Workbench: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
|||
| Line 1: | Line 1: | ||
=Specification= | =Specification= | ||
The workbench should allow for selecting of 10 modules. Various configurations of axes can be selected by the individual import of X, Y and Z axes. This allows for piggy-backing axes, using multiple axis for X (see [[D3D Geometry]]) | |||
==MVP== | |||
*Workbench has buttons to import : | |||
:*Frame - up to 24" on each side | |||
:*Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24" | |||
:*Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece) | |||
:*Extruder with sensor holder + sensor | |||
:*Heated bed - size can be changed from 5" to 24" | |||
:*Controller | |||
:*Power Supply | |||
:*Cable Guide - to handle wires in an XY-moving gantry | |||
:*Spool holder - very important; to avoid filament tie-up | |||
:*Wiring | |||
==Later Phases== | |||
*Belt width variation in Universal Axis. Includes double pulley for 6 mm belt. | |||
*Motor size variation in Universal Axis | |||
*Rod size variation | |||
*Pulley sizes variation | |||
*Development of Wiring Workbench in FreeCAD - to facilitate the drawing of wires and pipes | |||
=Working Document= | =Working Document= | ||
Revision as of 07:03, 26 September 2017
Specification
The workbench should allow for selecting of 10 modules. Various configurations of axes can be selected by the individual import of X, Y and Z axes. This allows for piggy-backing axes, using multiple axis for X (see D3D Geometry)
MVP
- Workbench has buttons to import :
- Frame - up to 24" on each side
- Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24"
- Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece)
- Extruder with sensor holder + sensor
- Heated bed - size can be changed from 5" to 24"
- Controller
- Power Supply
- Cable Guide - to handle wires in an XY-moving gantry
- Spool holder - very important; to avoid filament tie-up
- Wiring
Later Phases
- Belt width variation in Universal Axis. Includes double pulley for 6 mm belt.
- Motor size variation in Universal Axis
- Rod size variation
- Pulley sizes variation
- Development of Wiring Workbench in FreeCAD - to facilitate the drawing of wires and pipes
Working Document