D3D Workbench: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Specification= | =Specification= | ||
The workbench should allow for selecting of | The workbench should allow for selecting of the '''11 modules.''' Various configurations of axes can be selected by the individual import of X, Y and Z axes. This allows for piggy-backing axes (back to back with 2 axes), using multiple axis for X (see [[D3D Geometry]]), stacking axes (2 axes oriented next to each other in the Z direction) - and any other geometry - such as 4 axes to hold a large print platform, or single-sided support of the print bed, etc | ||
==MVP== | ==MVP== | ||
*Workbench has buttons to import : | *Workbench has buttons to import the '''11 modules''' : | ||
:*Frame - up to 24" on each side | :*Frame - up to 24" on each side | ||
:*Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24" | :*Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24" | ||
:*Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece) | :*Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece) | ||
:*Extruder with sensor holder + sensor | :*Extruder with sensor holder + sensor | ||
:*Endstops | |||
:*Heated bed - size can be changed from 5" to 24" | :*Heated bed - size can be changed from 5" to 24" | ||
:*Controller | :*Controller | ||
Revision as of 07:08, 26 September 2017
Specification
The workbench should allow for selecting of the 11 modules. Various configurations of axes can be selected by the individual import of X, Y and Z axes. This allows for piggy-backing axes (back to back with 2 axes), using multiple axis for X (see D3D Geometry), stacking axes (2 axes oriented next to each other in the Z direction) - and any other geometry - such as 4 axes to hold a large print platform, or single-sided support of the print bed, etc
MVP
- Workbench has buttons to import the 11 modules :
- Frame - up to 24" on each side
- Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24"
- Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece)
- Extruder with sensor holder + sensor
- Endstops
- Heated bed - size can be changed from 5" to 24"
- Controller
- Power Supply
- Cable Guide - to handle wires in an XY-moving gantry
- Spool holder - very important; to avoid filament tie-up
- Wiring
Later Phases
- Belt width variation in Universal Axis. Includes double pulley for 6 mm belt.
- Motor size variation in Universal Axis
- Rod size variation
- Pulley sizes variation
- Development of Wiring Workbench in FreeCAD - to facilitate the drawing of wires and pipes
Working Document