Josh Krokowski Log

Status - Done: tractor developement To Do: large tractor work, learn assembly2 workflow Blocks: tractor meeting, team meeting

Josh Krokowski work log

Josh's User Page	Weekly Team Hangout
D3D	Development Team Log	Jitsi meetup

Mon Oct 9, 2017

Wow, vibratory plows are badass.... links: here and here

Spent some time working on some FreeCAD stuff with Lex (GT2 Pulley)
I'm thinking it would be nice to have a CAD work "best practices" page put together if it doesn't already exist

Also, planning to head out to Factor e-farm for the tractor build at the end of October

Implement talk from Marcin:
I'd like to add one implement request before mower and tiller. It turns out that we need to trench 800 feet of power line to the seed eco-home for backup as we test the off-grid PV system at the Seed Eco-Home. Can you do a vibratory trencher as the first implement? It needs to go down only 12". Now you have the female mount, you can use that on it. Because microtrac is 41" wide, we also want to have a QA female that is 41" wide. Both would work if we make our male part a little more narrow. The pin locations are the limiting factor - but we have flexibility there as there are 2 pin locations on each side.

See vibratory plot for insderting cable - https://www.ditchwitch.com/trenchers/vibratory-plows/410sx - on the back of thiis ditch witch. It is just a motor with a non-balanced weight on the rotor. We can use Abe's 5 cu in motor - http://opensourceecology.org/wiki/File:PTO_Hydraulic_Motor.fcstd

Sun Oct 8, 2017

DFM on the bobcat standard quick attach
Pictures and Links about quick attach plates
Redrew mounting plate with sheet metal approach: File:Bobcat-QA-female.FCStd
The sheet metal add-on worked great (you can find it here ). My only qualm is the the bend feature doesn't have options for things like material added on the outside or inside or distance offsets. The radius also adds length to the total flange, which is unfortunate. Maybe we could get some programmers on that?

Sat Oct 7, 2017

Some work for implements on the tractor: A 2-pto motor brush hog. Rotor direct coupled to motors. Use Abe's new motors, 5 cu in. The cutter is a cross, 8" wide, with 8" of chain welded to tips. So each cutter has a 24" overall diameter. Thus we get 48" of cut from an implement that
A coumter-rotating time tiller driven by two high torque motors, same profile of motors as the 5 cu in. Motors ride on top, and are linked to the shafts via 100 chain here, since that is so expensive (including sprockets), please just use our existing 8 tooth sprocket and chain links without track pads as in our tracks. That will work well for high torque. A dust guard should be on top. Width of overall tiller should be 42", so hopefully 3' of tilling width. We can do 1/4" thickness for the chain link pieces.

Wed Oct 4, 2017

Finished Bobcat quick attach mounting plate: File:Bobcat-QA-mounting-plate.FCStd
About 2hrs for QA plate
Uploaded files for standards of quick attach
Next thoughts: update in tractor model
I was pretty frustrated with the lack of construction geometry in FreeCAD. It's not even possible to create a construction plane, or to set an offset distance for a pad or pocket. This makes it SUPER difficult to get things done when you are used to SolidWorks or the like. Also, mapping a sketch to a sketch face, then mapping out the edges takes way too much time for my liking. Those would be fun things to improve upon...

Tues Oct 3, 2017

create female bobcat quick attach Bobcat Standard Quick Attach
team meeting (about 1.75 hrs) covered a lot of ground, notes here
joined slack channel, lets talk Python about FreeCAD Workbench Programming 101 & D3D Workbench in FreeCAD

Tues Sept 19, 2017

~2hr meeting and HR/recruiting presentation
~1hr looking over MicroTrac
get working on large tractor frame, MicroTrac frame:File:Frame.fcstd

Tues Sept 5, 2017

Download OSE Linux and test Live USB
Front loader arms with info Tractor Construction Set 2017

Tues Aug 29, 2017

team meeting
Things to work on:
Geometry considerations for power cube: https://www.youtube.com/watch?v=Tw24eC0pze4
study powercube orientation above to figure out 20" x 20" x 31"
lulzbot extruder for future 3d printer
endstop integration
timesheet migration to osedev.org next week
assembly2 workflow "level 2"
learn commit with git for FreeCAD

Fri Aug 18, 2017

Finish Rough model of 16hp engine: File:Xp16hp.FCStd (about 4hr)

Thurs Aug 17, 2017

About an hour of finding documentation for the 16HP engine for the Power Cube
Begin FreeCAD Model of the the 16HP Engine for the Power Cube

Tues Aug 15, 2017

Fill out timesheet
Dev Team meeting

Fri Aug 11, 2017

Work with SVGs for the LAIs

Wed Aug 9, 2017

Joined design sprint at 1PM CST, layout path ~45min
Open FreeCAD Assem 1:45
Search for belt pegs (couldn't find), switch over to working on fitting axes & bed to frame for the rest of design sprint

Tues Aug 8, 2017

Dev Team Presentation
Planned Design sprint Wednesday, watch Roberto's Video

Sat Aug 5, 2017

Filled out user page for myself and completed tasks for new developer orientation

Thurs Aug 3, 2017

watched team meeting/tractor team meeting, look through filament maker wiki page.
Seems to be work on Spool winder, but extruder seems to be in good place?

Wed Aug 2, 2017

FreeCAD test completed!

Mon Jul 31, 2017

Developer Test: OSE linux set up on USB