D3D Ceramic Printer: Difference between revisions
Jump to navigation
Jump to search
(Minor usability improvments) |
(Expanded the page) |
||
| Line 1: | Line 1: | ||
=Basics= | |||
- Part of the [[Open Source Digital Fabrication Construction Set]] | - Part of the [[Open Source Digital Fabrication Construction Set]] | ||
- A [[D3D Printer]] modified to print | - A [[D3D Printer]] modified to print ceramic parts | ||
- Does so by using a special syringe and tube insead of the usual extruder and nozzle | - Does so by using a special syringe and tube insead of the usual extruder and nozzle | ||
=Used For= | |||
- Art | |||
- Ultra High Temperature Parts | |||
=Industry Standards= | |||
- [http://www.personalfab.it/en/shop/clay-extruder-kit-2-0/ Wasp Version (note they may be a good source for the extruder as well)] | |||
- [http://www.deltabots.com/ DeltaBot] | |||
=Existing Open Source Design= | |||
- | |||
=Basic Design= | |||
- | |||
=BOM= | |||
- | |||
=See Also= | |||
- | |||
=Useful Links= | |||
- [https://all3dp.com/1/3d-printing-ceramic-3d-printer/ This page has some good information on ceramic 3D Printing] | |||
Revision as of 07:40, 8 January 2018
Basics
- Part of the Open Source Digital Fabrication Construction Set
- A D3D Printer modified to print ceramic parts
- Does so by using a special syringe and tube insead of the usual extruder and nozzle
Used For
- Art
- Ultra High Temperature Parts
Industry Standards
- Wasp Version (note they may be a good source for the extruder as well)
- DeltaBot
Existing Open Source Design
-
Basic Design
-
BOM
-
See Also
-
Useful Links
- This page has some good information on ceramic 3D Printing