Open Source Hydronic Stove: Difference between revisions
Jump to navigation
Jump to search
(→Final) |
No edit summary |
||
| Line 1: | Line 1: | ||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/R6NV21clyTA" frameborder="0" gesture="media" allow="encrypted-media" allowfullscreen></iframe></html> | |||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/kb33Enl9KmU" frameborder="0" allowfullscreen></iframe></html> | <html><iframe width="560" height="315" src="https://www.youtube.com/embed/kb33Enl9KmU" frameborder="0" allowfullscreen></iframe></html> | ||
Revision as of 04:02, 8 January 2018
2017
Final Design Including Control Panel
Initial
2016
CAD
Mechanical Design
Hint: This is a detailed document with many pages. Hit the right arrow to go through the slides.
Hint: See CAD Files +fabrication cheatsheets at Hydronic Stove Fab Cheatsheets
Control Panel
Genealogy
Hint: Most current on top
- 2016: Current work. Adding Open Source TEG + household hot water heating.
- 2015: The 2015 version was an open source hydronic wood stove - see Open Source Hydronic Wood Stove
- 2014:The first hydronic version was installed, using a commercial hydronic stove with an open source hydronic control panel - Open Source Hydronic System
- 2012:The 2012 version was a wood stove, but no heat exchanger was built - Wood_Stove_with_Heat_Exchanger