3D Print Cooling: Difference between revisions
Jump to navigation
Jump to search
m (Marcin moved page 3D Print Cooling Fan to 3D Print Cooling without leaving a redirect: bad title) |
No edit summary |
||
| Line 1: | Line 1: | ||
=Cooling | =Thermodynamics of Print Layer Adhesion= | ||
*Good explanation. Layer below must be solid prior to printing the next layer, as the bottom layer must be in its final set position, and not displaced when still soft. The layer above must have enough thermal inertia to melt the layer below it - it is not that the layer below is still melted. https://hackaday.com/2016/01/29/keep-your-nozzle-hot-and-your-prints-cool/ | |||
=Cooling Fans= | |||
*Oversized design on Thingiverse - [https://www.thingiverse.com/thing:2448723] | *Oversized design on Thingiverse - [https://www.thingiverse.com/thing:2448723] | ||
*Overview video - | *Overview video - | ||
Revision as of 03:27, 26 May 2018
Thermodynamics of Print Layer Adhesion
- Good explanation. Layer below must be solid prior to printing the next layer, as the bottom layer must be in its final set position, and not displaced when still soft. The layer above must have enough thermal inertia to melt the layer below it - it is not that the layer below is still melted. https://hackaday.com/2016/01/29/keep-your-nozzle-hot-and-your-prints-cool/
Cooling Fans
- Oversized design on Thingiverse - [1]
- Overview video -
- Another shows the drastic difference between cooled and not cooled PLA -