E3D Titan Aero Extruder: Difference between revisions
Jump to navigation
Jump to search
(→CAD) |
(→CAD) |
||
| Line 27: | Line 27: | ||
=CAD= | =CAD= | ||
*Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/] | *Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/]. See Mirrored_aero_assem.fcstd file | ||
[[File:Titanearo.jpg|500px]] | [[File:Titanearo.jpg|500px]] | ||
Revision as of 03:03, 29 May 2018
Introduction
An open source extruder for regular and flexible filaments that can also be used with the Volcano heater block + nozzle for printing with volcano 0.6 mm to 1.2 mm nozzles.
Build Instructions
Bugs
- Grub screw on pinion gear interferes with the second gear because the grub screw is not recessed. This requires more precise mounting of the pinion gear, and disallows usage of the extruder without a mount plate. A 2 mm spacer is needed for use with the standard D3D Extruder Holder.
Titan Extruder (not aero)
- https://e3d-online.com/titan-extruder - Is there any advantage of Aero to the Titan?
Titan Aqua
- For warm and heated chambers - [1]
Moarstruder
- 100 g/hr flow rate - [2]
Shopping
CAD
- Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [6]. See Mirrored_aero_assem.fcstd file
