LiPo Charger USB v18.02: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
=Overview=
Lithium polymer battery unit. Charges and maintains battery from USB 5V, output 5V over USB, allows data to pass through.
Lithium polymer battery unit. Charges and maintains battery from USB 5V, output 5V over USB, allows data to pass through.
==Goals==
*No need to remove for basic operations
**Charge through panel mounted USB port
**Upload Arduino skectches through USB port
**On off switch


=Tentative BOM=
=Tentative BOM=

Revision as of 04:01, 4 June 2018

Overview

Lithium polymer battery unit. Charges and maintains battery from USB 5V, output 5V over USB, allows data to pass through.

Goals

  • No need to remove for basic operations
    • Charge through panel mounted USB port
    • Upload Arduino skectches through USB port
    • On off switch

Tentative BOM

  • LiPo Charger "Battery Babysitter" Sparkfun
  • Female Headers
  • Male Jumper Wires

Case

3D printed to mount and encase circuit boards in a end-user-friendly manner.

Scad
 

Wiring Diagram

edit

See Also