D3D v18.06

Hint: Overview: 13" frame, first time with Titan Aero extruder; new electronics mounting; first LCD screen version; double-sided tape for bed, kapton tape bed standoffs, bed MOSFET, all 12V, 0.6 mm nozzle

Development Template

edit

Software Notes

Change Log

• Since we used -BY-5V part number inductive sensor - PNP - logic had to be inverted on it.
• Changed Z_MIN_ENDSTOP_INVERTING to false in Configuration.h

Marlin

• Marlin is now on Github starting D3D_v18.06. https://github.com/OpenSourceEcology/3D-Printer-OSE-Marlin

Arduino Libraries

• Import LCD library - OSE_Marlin_and_Github#Import_any_necessary_libraries

Arduino Environment

• Use Arduino Environment 1.6.8 - preloaded with OSE Linux v1.0, or download from Arduino Previous Releases

Cura

• Control can be done from the Reprap Discount Full Graphic Smart Controller LCD or from OSE Lulzbot Cura

Arduino Uploads

• Uploading to Arduino can be tricky.
• First, select the right board
• Second, select the right port
• Possible errors: permission denied while using OSE Linux. This should not happen by default. Let's check if other linux has this issue.

avrdude: ser_open(): can't open device "/dev/ttyUSB0": Permission denied ioctl("TIOCMGET"): Inappropriate ioctl for device ioctl("TIOCMGET"): Inappropriate ioctl for device avrdude: ser_send(): write error: Bad file descriptor Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

Build

Hint: Click on Facebook post, then navigate to the OSE Workshops FB Page to access pictures of 47 steps from the original posting

Links

• D3D_v18.06_Packing_List