Revision as of 23:11, 12 November 2018

Working Doc

Adding a print cooling fan. Use these part libraries

[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd Blower.
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower.
[1] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.

Download in FreeCAD format - [7]

@@ Line 18: / Line 18: @@
 File:check.png|[[File:titanaeromarcin.fcstd]]  Marcin's Titan Aero sensor holder - not finished. Finished STL - [[File:titanaeromarcin.stl]]
 File:check.png|[[File:fanwithholderpattern.fcstd]] Fan mount for a print cooling fan
-File:check.png| Titan Aero with blower. [[File:titanwithblower.png]]
+File:titanwithblower.png| Titan Aero with blower.
 File:check.png|[http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.