Revision as of 23:15, 12 November 2018

Working Doc

Adding a print cooling fan. Use these part libraries

8 mm sensor
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd Blower.
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.

Download in FreeCAD format - [8]

@@ Line 12: / Line 12: @@
 <gallery perrow=6>
-File:8mmsensor.jpg|8 mm sensor
+File:8mmsensor.jpg|8 mm sensor [[File:8mmsensor.jpg]]
 File:extruderholder.jpg|[[File:check.png]] '''[1] D3D Extruder Holder.''' [[File:Motor interface.fcstd]] , [[File:Motor interface.stl]]
 File:check.png|[[File:5015blower.fcstd]] '''Blower'''.