D3D Print Quality Requirements: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*3 sigma quality on brimless print start *Turbo fan for horizontal printing *100 mm/sec 60 Shore A rubber printing speed *10 lb per day print rate per extruder *Bumper part ha...") |
No edit summary |
||
| Line 4: | Line 4: | ||
*10 lb per day print rate per extruder | *10 lb per day print rate per extruder | ||
*Bumper part harvester with horizontal printing. | *Bumper part harvester with horizontal printing. | ||
*Active bed cooling for rapid part release | |||
*Mixing extruder print head for multiple material printing and material transition | |||
*4 sigma quality control on mass production printing with auto part harvest | *4 sigma quality control on mass production printing with auto part harvest | ||
Revision as of 19:49, 24 February 2019
- 3 sigma quality on brimless print start
- Turbo fan for horizontal printing
- 100 mm/sec 60 Shore A rubber printing speed
- 10 lb per day print rate per extruder
- Bumper part harvester with horizontal printing.
- Active bed cooling for rapid part release
- Mixing extruder print head for multiple material printing and material transition
- 4 sigma quality control on mass production printing with auto part harvest