Fischer-Tropsch: Difference between revisions
m (→Also on the OSE Wiki: changed internal link) |
|||
| Line 10: | Line 10: | ||
==Related Pages on the OSE Wiki== | ==Related Pages on the OSE Wiki== | ||
See Also | |||
*[[Gasifier]] | |||
*[[Compressed Fuel Gas]] | |||
*[[Pyrolysis Oil]] | |||
==External Links== | ==External Links== | ||
* Wikipedia: [http://en.wikipedia.org/wiki/Fischer-Tropsch Fischer-Tropsch] | * Wikipedia: [http://en.wikipedia.org/wiki/Fischer-Tropsch Fischer-Tropsch] | ||
* [http://www.allpowerlabs.org/ All Power Labs] - open source gasifiers. They also have a [http://www.youtube.com/user/allpowerlabs Youtube channel] | * [http://www.allpowerlabs.org/ All Power Labs] - open source gasifiers. They also have a [http://www.youtube.com/user/allpowerlabs Youtube channel] | ||
Revision as of 00:38, 4 September 2011
The Fischer-Tropsch (FT) process was first developed in Germany in the 1920's. It was used in Germany during WWII to make liquid fuels from coal. The FT process requires a feed stream consisting largely of carbon monoxide and hydrogen (also known as "syngas"). Thus, gasification is the first step inproducing fuels from biomass (bio-to-liquid, BTL). The FT process converts the feed gas into liquid organic compounds, carbon dioxide and water. The conversion takes place in the presence of a catalyst, usually iron (magnetite) or cobalt. The temperature, pressure and catalyst determine whether a light or heavy syncrude is produced. For example, at 330°C mostly gasoline and olefins are produced whereas at 180 to 250°C mostly diesel and waxes are produced.
Small-scale Gas-To-Liquids: Proof of Principle
This process can be done on the small scale, as shown in this video:
Related Pages on the OSE Wiki
See Also
External Links
- Wikipedia: Fischer-Tropsch
- All Power Labs - open source gasifiers. They also have a Youtube channel