D3D v20.04: Difference between revisions
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
[[File:d3d2004nichromecalc.png]] | [[File:d3d2004nichromecalc.png]] | ||
Notes: | Notes: | ||
*Fiberglass sleeve used - HTG fiberglass, does not flake off like standard high temperature sleeving. | *Fiberglass sleeve used - HTG fiberglass, does not flake off like standard high temperature sleeving. See [http://www.hitexinsulation.com/products/HTG-Fiberglass-Sleeve.htm] | ||
*Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [https://www.aliexpress.com/item/32862062385.html?spm=a2g0s.9042311.0.0.27424c4dnHgKvS] | *Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [https://www.aliexpress.com/item/32862062385.html?spm=a2g0s.9042311.0.0.27424c4dnHgKvS] | ||
*This is packed into 6' of 6 mm tight braid fiberglass sleeve. | *This is packed into 6' of 6 mm tight braid fiberglass sleeve. | ||
Revision as of 03:32, 3 April 2020
Specifications
- 12" heat bed
- 1400W heat bed
- Transitioning to OSE Universal Gearless Extruder
- Based on D3D Pro geometry
Heater Element
Notes: