D3D Universal v20.05 Calculations: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Heater= *8 feet for easy winding in a workshop *850F max temp, good for sleeve rated at 1000F *Is on all the time during a print, keeps complexity down. Essentially a PLA + r...") |
(→Heater) |
||
| Line 1: | Line 1: | ||
=Heater= | =Heater= | ||
*120V edition. For 240V, needs to increase R significantly. Must increase the length of the resistance element 4x or decrease its gauge. P=I^2*R - to keep power same. | |||
*8 feet for easy winding in a workshop | *8 feet for easy winding in a workshop | ||
*850F max temp, good for sleeve rated at 1000F | *850F max temp, good for sleeve rated at 1000F | ||
Revision as of 00:09, 29 May 2020
Heater
- 120V edition. For 240V, needs to increase R significantly. Must increase the length of the resistance element 4x or decrease its gauge. P=I^2*R - to keep power same.
- 8 feet for easy winding in a workshop
- 850F max temp, good for sleeve rated at 1000F
- Is on all the time during a print, keeps complexity down. Essentially a PLA + rubber printer for small production.
