Open Source Circuit Maker: Difference between revisions
Jump to navigation
Jump to search
(Minor Clarification) |
(Finished the page out) |
||
| Line 1: | Line 1: | ||
=Basics= | |||
*Inkjet printer is to printed essays as this is to assembled [[PCBs]] | |||
*Merges [[https://wiki.opensourceecology.org/wiki/Construction_Sets#Electronics.2FComputer_Stuff this] and the [Open Source Digital Fabrication Construction Set]] along with misc other tech | |||
*Endgoal is click to circuit, early iterations may be less easy of a workflow | |||
=Plotting= | |||
*System consists of 1 mm bit - which can do up to the circuit cutout step from bulk. | *System consists of 1 mm bit - which can do up to the circuit cutout step from bulk. | ||
*Drill holes, mill, and cut out final product. | *Drill holes, mill, and cut out final product. | ||
*Use | *Use [[Pick and Place]] for automated mounting of components. (and [[Solder Paste]] + some form of heating for [[Reflow Soldering]] | ||
*Use D3D | *Use [[D3D CNC Circuit Mill]] | ||
*[[Through-hole]] is ok, as well as [[SMD]]. | *[[Through-hole]] is ok, as well as [[SMD]]. | ||
=Internal Links= | |||
*[[PCB]] | |||
=External Links= | |||
*? | |||
[[Category:Electronics]] | |||
Latest revision as of 09:10, 1 June 2020
Basics
- Inkjet printer is to printed essays as this is to assembled PCBs
- Merges [this and the [Open Source Digital Fabrication Construction Set]] along with misc other tech
- Endgoal is click to circuit, early iterations may be less easy of a workflow
Plotting
- System consists of 1 mm bit - which can do up to the circuit cutout step from bulk.
- Drill holes, mill, and cut out final product.
- Use Pick and Place for automated mounting of components. (and Solder Paste + some form of heating for Reflow Soldering
- Use D3D CNC Circuit Mill
- Through-hole is ok, as well as SMD.
Internal Links
External Links
- ?