Seed Home v2 Conceptual Design: Difference between revisions
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
Marcin | Marcin | ||
<html> | <html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vR0B0Disj3OdBReC1_fvVak1TITVHuEYQVyMDcbp-KXSmrYYQJMmzlgThKzgmrPmzBfssrOsOMCqb2N/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html> | ||
[ | [https://docs.google.com/presentation/d/17MiaqQ-yA0U_kpegCGK86HNgPwA1lqh-jJdX-2oyNEs/edit#slide=id.g94d53d4eca_0_248 edit] | ||
=Frost Protected Shallow Foundation Design Guide= | =Frost Protected Shallow Foundation Design Guide= | ||
Revision as of 19:57, 29 September 2020
Wall Interface Detail
Engineering Verification
Hello,
We would like to ask you if you can verify our structural engineering detail for the walls of a single-story residential construction. The house is on slab on grade, and we are building using 4'x9' wall panels. These are 2x6 lumber framed panels with a 24" on center stud. Please see the concept document attached.
Our question is - is the panel-wall design structurally sound? We are using a top plate for shear stabilization of adjacent panels. Adjacent panels are fastened together using nails or screws.
Thanks, Marcin
Frost Protected Shallow Foundation Design Guide
- From US HUD - [1]
Possible Shapes
Foundation
Utility Panel Detail
General Design Concept
- Based on Seed Eco-Home, Open Building Institute modules
- Grow home - expands as needed
- Helical pier
foundation preferred. The Slab Decision. - Modular - prebuilt modules allow for weekend build, and then full build in 1 week with 2 people
- Land is not included
- Includes biodigester and PV options for off-grid operation
- Also see Onsite Power Generation and Storage-To-Grid
- Roof area and all that will aid in calculations