Talk:Seed Home 2 Roof: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "Parameters for assessing cost and practicality: #Materials: EPDM, TPO or PVC #Installation method: fully adhered, mechanically fasteners + heat welded (seams only) or mechanic...")
 
(Blanked the page)
Line 1: Line 1:
Parameters for assessing cost and practicality:
#Materials: EPDM, TPO or PVC
#Installation method: fully adhered, mechanically fasteners + heat welded (seams only) or mechanically fastened + glued (seams only)
#Form factor: all of these materials come in a variety of sizes - but none is a perfect fit for our roof size - so we need to pick the one that leads to the least waste (cut ends)


Suppliers that sell directly to the public.
Roofkit (EPDM only, I think):
*Product line at menards: 45 mil EPDM, latex adhesive, primer, seam tape. This comes out to around $1.15/sq ft - but that doesn't include the cost of seams (which use primer and seam tape) nor waste due to form factor.
*Installation manual
*Website - with installation videos and FAQ
WeatherBond (EPDM, TPO and PVC)
*Comes in a variety of sizes (for example). Can also be acquired by the foot.
*Fastener plates
*Installation videos
*Loads of technical and how-to details (if you can make sense of them):
#[https://www.weatherbondroofing.com/wp-content/uploads/Thermoplastic_Specification_and_Details.pdf]
#[https://www.weatherbondroofing.com/wp-content/uploads/WB-4054-TPO_PVC-Material-Estimator-Sheet-8.5-x-11_03-24-20.pdf]
#[https://www.weatherbondroofing.com/wp-content/uploads/607877-WB-4937-Rooftop-Detail-Guide_04-25-18.pdf]
#[https://www.weatherbondroofing.com/wp-content/uploads/WB-4342-Product-Reference-Guide_03-25-20.pdf]
#[https://www.weatherbondroofing.com/wp-content/uploads/2018-WBPC-2.0-TPO-PVC.pdf]
#[https://www.weatherbondroofing.com/wp-content/uploads/603160-4044-WB-TPO-Rooftop-Detail-Installation-Guide_04-19-18.pdf
#[https://www.weatherbondroofing.com/wp-content/uploads/2018-WBPMA-2.0B-TPO.pdf]
Installing mechanically fastened TPO seems relatively straightforward up to a point (you unroll the membrane, fasten the edges to the deck with screws and plates, overlap the next sheet and heat-weld the seam). But on the written instructions they keep talking about "perimeter sheets" - but I can't find out what perimeter sheets are, how many we need, how much they cost nor how to install them (are they glued?). It's like a ghost material :)
They also make a weld-free TPO, but I can't find it for sale online (we may need to contact the manufacturer). '''Weld-free means Seam Tape'''.
#https://www.weatherbondroofing.com/wp-content/uploads/604551-WB-1035-Weld-Free-TPO-Trifold-Brochure_03-22-18.pdf
#https://www.weatherbondroofing.com/wp-content/uploads/WB-1042-Weld-Free-TPO-Installation-Guide_02-01-18.pdf
One more thing: [[Elijah]] says he doesn't know whether TPO can still be heat-welded after prolonged exposure to UV. So this is a question for the manufacturer - as it would affect if and how we could reuse the membrane.
Mechanically fastened roofing membranes:
#https://youtu.be/tHkaXuxgqjo?t=28
#https://youtu.be/zX8T7h-UDg8?t=92
#https://www.youtube.com/watch?v=Bk03UlnvdOs
#https://www.youtube.com/watch?v=q3IWuCndhh0
See also [[Roofing Membranes]]
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTSDwJb1HA3Ep18iPoF1Tw5Q5DaUOXUTLT3x-1cvW2EXEZF4-WS6nBYy76svMtla6ERZb3NOxRXTSGc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>
[https://docs.google.com/presentation/d/1jr2enge4F-wzPdX2xwkX0djvuFSm3o2l4Vq0CkZ90dg/edit#slide=id.g5c3be0ce2d_1_28 edit]

Revision as of 23:39, 15 October 2020

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Talk:Seed_Home_2_Roof&oldid=235832"