April 2011 Production Run Hydraulics BOM: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 53: Line 53:


*[1] Pump - 0.98 cu in - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=]
*[1] Pump - 0.98 cu in - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=]
*[1] 3/4" breather cap -[https://www.surpluscenter.com/item.asp?item=9-7957-12&catname=hydraulic]
*'''[1] SAE 12 in to 3/4 hosebarb- [https://www.surpluscenter.com/item.asp?item=9-4604-12-12&catname=hydraulic]'''
*'''[1] SAE 12 in to 3/4 hosebarb- [https://www.surpluscenter.com/item.asp?item=9-4604-12-12&catname=hydraulic]'''
*'''[1] SAE 10 out to 1/2 NPT - [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]'''
*'''[1] SAE 10 out to 1/2 NPT - [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]'''

Revision as of 07:23, 2 May 2011

Tractor

See Parts Sourcing for contact information. Note: this includes hydraulics and balance of system after metal.

  1. [8] 1-7/8" Flange Bearings - [1] ; plus BearingsOn plus Big Bearing Store
  2. [2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [2] & [2] of [[3]]
  3. [8] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [4] for Loader and QA Plate cylinders [5]
  4. [4] Motors - [6]
    1. [8] SAE M 10 to NPT M 1/2" for Ports [7]
    2. [4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [8]
    3. [8] 1/2" QC for Motors [9]
    4. [4] 1/4" QC for motors [10]
  5. [2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [11]
  6. [1 1/3] 1-3/8" 6T fully splined shafting - [12]
  7. [2] Female 1-3/8" 6T spline coupling - [13], $30 each
  8. [12] 1.875" double split shaft collars - [14]
  9. Double split - $11 - [15]
  10. Double split - $9 -Houston Bearing
  11. Double split - $9 free ship - [16]
  12. Single split - [17]

Motor Valves

  • [1] 3-spool motor valve, 25 gpm - [18], $288
  • [4] 1/2" Quick Couplers [19] - for motor valve work ports
  • [2] 3/4" Quick Couplers for one set of motor valve work ports - Dalton Hydraulics
  • [4] 1/2" Swivels for work ports [20] - for 2 sets of work ports to wheel motors
  • [1] 3/4" tee for inlet - [21]
  • [1] 3/4" elbow for inlet - [22]
  • [2] 30 GPM check valves for inlet - [23]
  • [2] 3/4" QC for inlet - Dalton
  • [5] 3/4"nips for inlet including valve in/out - [24]
  • [2] 1/2 NPT hex nipples [25]-for auxiliary pair of motor valve work ports
  • [2] 3/4 NPT to 1/2 NPT bushing [26] - auxiliary work ports - NA

Loader Valve

  • [1] Prince 2 Spool Valve - [27] $189
  • [1] 3/4" NPT nip for outlet - [28]
  • [4] 1/2" Swivels for work ports [29] - for 2 sets of work ports to wheel motors
  • [1] 3/4" QC for outlet
  • [2] 1/2" tees to split to 2 cylinders

Cushion Valves

  • [1] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [30]
  • [6] 1/2" swivels [31] - 4 valve outlet + 2 cushion valve
  • [2] 1/2" nip - [32] - going from between swivel and tee
  • [4] NPTF Tee [33]- (includes QA plates

Power Cube

  • [1] Pump - 0.98 cu in - [34]
  • [1] 3/4" breather cap -[35]
  • [1] SAE 12 in to 3/4 hosebarb- [36]
  • [1] SAE 10 out to 1/2 NPT - [37]
  • [1] 3/4 to 1/2 reducer bushing - NA
  • [1] Coupler half, 5/8" - $10
  • [1] Coupler half, 1 1/8" - $10
  • [1] Solid spider - $14
  • [1] Suction strainer, 2" to 1-1/4" - [38] - $23
  • [1] 3" suction strainer - [39] - $42
  • [1] Pressure relief for power cube bypass- [40]
  • [1] 20 GPM return Line Filter - [41]
  • 1" female coupling into frame
  • [1] 1" nip to filter - [42]
  • [1] 30 GPM return Line Filter - [43]
  • [1] 1"-3/4" reducer bushing - [44]
  • [1] 3/4" tee - [45]
  • [2] 3/4" nip - [46]
  • [1] 30 gpm Quick Coupler to return line
  • [1] 3/4"-1/4" NPT reducer bushing for case drain - [47]
  • [1] 1/4" nip - [48]
  • [1] 1/4" quick couplers for case drain - [49]

Soil Pulverizer

  • [1] 7.6 cu in hydraulic PTO motor - [50]
  • [2] 10' hose - [51] $21
  • [2] 1-7/8" bearings - []

Hoses

Power Cube

  • [2] 10 foot hoses - [52]

Between Motor Valves & Motors

  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of the valves [53]
  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of front motors [54]
  • [4] 1/2 X 1/2 X 1/2 NPTF TEE [55]
  • [4] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for rear motors [56]

Motor Case Drains

  • [2] 1/4" X 72" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [57]
  • [1] 1/4" X 30" NPTM 2750 PSI HYD HOSE from Tee to Tee in return hose [58]
  • [1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [59]
  • [3] 1/4 X 1/4 X 1/4 NPTF TEE [60]
  • [3] 1/4 NPT hex nipples [61]
  • [4] 1/4" NPT quick couplers are already with the motors

Front Loader

  • [2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE from Valves to Cushion [62]
  • [2] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for left front loader cylinder [63]
  • [1] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [64]
  • [1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [65]

Front loader QA Cylinder Hoses

  • [4] 3/8" NPTM x 1/2" NPTF swivel - [66] - swivels for QA cylinders
  • [2] 1/2" nips - going from cylinder swivels to tees - [67]
  • [2] 1/2" NPTF tees - from cylinder to hoses - [68]
  • [2] male QC tips - for plugging into control valves - [69]
  • [2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [70]
  • [1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [71]
  • [1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [72]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=April_2011_Production_Run_Hydraulics_BOM&oldid=24000"