Open Source Dessicant-Humidifier Cycle Based Liquid Chiller: Difference between revisions
Jump to navigation
Jump to search
(Added some more information) |
(Added some more information) |
||
| Line 19: | Line 19: | ||
*[[Bioballs]] would work and are inexpensive | *[[Bioballs]] would work and are inexpensive | ||
*[[Stainless Steel Scrubbers]] based packing would work as well (would a conductive packing offer any advantages over thermally insulative plastic? ) | *[[Stainless Steel Scrubbers]] based packing would work as well (would a conductive packing offer any advantages over thermally insulative plastic? ) | ||
==Pumps== | |||
*"Fountain Pumps" usually go for ~20-50 usd each (need to determine [[GPH]] flow needed/diminishing returns on higher flow?) | |||
==PVC Pipe== | ==PVC Pipe== | ||
Revision as of 06:03, 1 February 2021
Baics
- OSE's Design for a Dessicant-Humidifier Cycle Refrigeration based Hydronic Cooling system
Existing Open Source Designs
Minimum Viable Product
Basic Design
Part A
Part/Componet B
BOM
Column Packing
- Should be simpler than a Spray Tower system due to it's "open" nature (even if in a sealed+clean container, it doesn't have a sealed pressurized liquid tube)
- Bioballs would work and are inexpensive
- Stainless Steel Scrubbers based packing would work as well (would a conductive packing offer any advantages over thermally insulative plastic? )
Pumps
- "Fountain Pumps" usually go for ~20-50 usd each (need to determine GPH flow needed/diminishing returns on higher flow?)
PVC Pipe
- 4in PVC Pipe seems like the largest size at the local "Home Depot" store
CAD
Code
Software
Firmware
Internal Links
- [Dessicant-Humidifier Cycle Refrigeration]]
- Hydronic Cooling