CEB Press v21.06 Calculations: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Cylinder Evaluation= *5" special cylinders are $500 for one with a rod sticking out 3": *Is it an option to use 2 cylinders, if they can be mounted effectively? It could make...") |
No edit summary |
||
| Line 2: | Line 2: | ||
*5" special cylinders are $500 for one with a rod sticking out 3": | *5" special cylinders are $500 for one with a rod sticking out 3": | ||
*Is it an option to use 2 cylinders, if they can be mounted effectively? It could make sense if we CNC cut mounting plates as needed. | *Is it an option to use 2 cylinders, if they can be mounted effectively? It could make sense if we CNC cut mounting plates as needed. | ||
=Pressing Rate= | |||
*Same cylinder as before | |||
*Pump all power into large cylinder upon large cylinder motion | |||
*Calculations based on [[CEB Press v17.08 Calculations]], which show 1.52 gallons per cycle. | |||
**We get 7.1 block per minute. | |||
*In case of 16 hp engine, this works. Add more power, and we have: | |||
*77 cu in per cycle for small cylinder. Running on 10.6 gpm, we get 32 cycles per minute or | |||
Revision as of 02:40, 1 July 2021
Cylinder Evaluation
- 5" special cylinders are $500 for one with a rod sticking out 3":
- Is it an option to use 2 cylinders, if they can be mounted effectively? It could make sense if we CNC cut mounting plates as needed.
Pressing Rate
- Same cylinder as before
- Pump all power into large cylinder upon large cylinder motion
- Calculations based on CEB Press v17.08 Calculations, which show 1.52 gallons per cycle.
- We get 7.1 block per minute.
- In case of 16 hp engine, this works. Add more power, and we have:
- 77 cu in per cycle for small cylinder. Running on 10.6 gpm, we get 32 cycles per minute or