Revision as of 16:18, 23 July 2021

Notes

Note everything here ends up at ~~top plate~~ - 2nd level floor added to allow stairway calculation and positioning - see Stairs
The interior bathroom door and laundry wall are taller than 9' because they reach to the underside of the second story subfloor, or almost 10'. Maybe finish below the joists, and connect to joists? (Added top plate to interior walls 48-52)

Hint: Need to verify position and length of modules 57-59

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	01:43, 9 August 2021	(911 KB)	Marcin (talk \| contribs)	Added carport
	02:33, 7 August 2021	(862 KB)	Coderjeff (talk \| contribs)	merge Laundry
	21:22, 24 July 2021	(843 KB)	Coderjeff (talk \| contribs)	revised 56, 57, 58, 59
	20:53, 24 July 2021	(840 KB)	Coderjeff (talk \| contribs)	revised 48, 49, 50, 52
	00:38, 24 July 2021	(840 KB)	Coderjeff (talk \| contribs)	revised stairs
	22:55, 23 July 2021	(811 KB)	Coderjeff (talk \| contribs)	Add joist blocking to support top of interior wall 52
	22:25, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	re-merge module 51
	21:29, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	Add 3" to module 50
	21:11, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	add 3" to Modules 48, 49 & 52 - remove 2nd top plate on interior wall
	20:01, 23 July 2021	(811 KB)	Coderjeff (talk \| contribs)	add 3" to Modules 56-59

You cannot overwrite this file.

The following 2 pages use this file: