Revision as of 17:43, 30 November 2021

OSE Shredder v21.10. - FreeCAD -File:Oseshredderv2110.FCStd
Blade assembly. - FreeCAD -File:Bladeassy.FCStd
Blade spacer. - FreeCAD -File:Bladespacer.FCStd
Blade. - FreeCAD -File:Blade.fcstd. STL - File:Blade.stl. Gcode - File:Blade.gcode.zip
Blade fit. - FreeCAD -File:Bladefit.fcstd
Blade spacer. - FreeCAD -File:Bladespacer.fcstd
Bearing - FreeCAD -File:3inchbearing.fcstd
File:45cuinmotor.fcstd. 45.6 cubic inch motor standard for LifeTrac and MicroTrac. Also used in OSE Shredder and Trencher.
Double chain coupler. - FreeCAD -File:Doublechaincoupler.fcstd
3" shaft. 36". 32-3/4" stick out of coupler. - FreeCAD -File:3inchshaft.fcstd
4" tube, 1/2" wall. - FreeCAD -File:4inchtube.fcstd

Links

Revision as of 17:43, 30 November 2021 (view source) Marcin (talk \| contribs) No edit summary ← Older edit		Revision as of 17:43, 30 November 2021 (view source) Marcin (talk \| contribs) No edit summary Newer edit →
Line 8:		Line 8:
	File:bladeassy.png\|'''Blade assembly.''' - FreeCAD -[[File:bladeassy.FCStd]]		File:bladeassy.png\|'''Blade assembly.''' - FreeCAD -[[File:bladeassy.FCStd]]

	File:~~spacer~~.png\|'''~~Spacer~~.''' - FreeCAD -[[File:~~spacer~~.FCStd]]		File:bladespacer.png\|'''Blade spacer.''' - FreeCAD -[[File:bladespacer.FCStd]]