OSE Filament Extruder v21.10 Future Work: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added some Ideas I had)
m (Added a Category to the Page)
 
Line 5: Line 5:
*Currently a [[Wood Auger]] is used, which isn't an optimized geometry for the task of extruding plastic
*Currently a [[Wood Auger]] is used, which isn't an optimized geometry for the task of extruding plastic
*May be less burning of plastic inside the tube / better flow rates etc if optimized ( <- Needs specifics + better writing)
*May be less burning of plastic inside the tube / better flow rates etc if optimized ( <- Needs specifics + better writing)
[[Category: OSE Filament Extruder]]

Latest revision as of 23:11, 26 September 2023

Past Work

Replacement of the Wood Auger with an Extrusion Screw

  • Currently a Wood Auger is used, which isn't an optimized geometry for the task of extruding plastic
  • May be less burning of plastic inside the tube / better flow rates etc if optimized ( <- Needs specifics + better writing)