The Print Codex: Difference between revisions
Jump to navigation
Jump to search
(Added some more links under the "External Links" section) |
(Added some more links under the "External Links" section) |
||
| Line 19: | Line 19: | ||
*[https://www.thingiverse.com/thing:6150921 The [[Thingiverse]] Page for the Part they Print and Send] | *[https://www.thingiverse.com/thing:6150921 The [[Thingiverse]] Page for the Part they Print and Send] | ||
**They use the [https://creativecommons.org/licenses/by-nc-sa/4.0/ Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)] license for this, so sadly not optimal, but all things considered great! (Especially since the main benefit isn't the file, it's them being able to have all the filaments with that cost being spread out, only need this file for the few you get, but don't have in a set etc) | **They use the [https://creativecommons.org/licenses/by-nc-sa/4.0/ Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)] license for this, so sadly not optimal, but all things considered great! (Especially since the main benefit isn't the file, it's them being able to have all the filaments with that cost being spread out, only need this file for the few you get, but don't have in a set etc) | ||
*[https://youtu.be/62qN3Am1lMk A Video by the YouTube Channel "[[Filament Stories]]" Titled "The Print Codex: Kickstarter Launch!" ] ( '''~1 Minute Watch''' ) | |||
Latest revision as of 18:11, 21 August 2023
Basics
- A Group/Company Whose Goal is to Provide a Service Similar to a Pantone Color Matching System but for FDM 3D Printing Filament
- Thus a designer, rather than needing to buy and test every single filament of interest can get "Sample Cards" (akin to Color Chips / Color Swatches / Paint Strips etc) of whole types of filament
- Thus can make this aspect of the design process easier and/or cheaper
Related Concepts
- Even if not buying their product, a similar system can be done, and have the same benefits short of cost savings:
- Designers should have access to Infill References , Layer Line References / Nozzle Size References
- (There are many models for these on file sharing sites like Thingiverse , Thangs , and Printables etc
- A Color Matching System is a great aspect of overall Quality Control
- Designers should have access to Infill References , Layer Line References / Nozzle Size References
Internal Links
External Links
- The Kickstarter Page for The Print Codex (Already Funded)
- The Thingiverse Page for the Part they Print and Send
- They use the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) license for this, so sadly not optimal, but all things considered great! (Especially since the main benefit isn't the file, it's them being able to have all the filaments with that cost being spread out, only need this file for the few you get, but don't have in a set etc)
- A Video by the YouTube Channel "Filament Stories" Titled "The Print Codex: Kickstarter Launch!" ( ~1 Minute Watch )