Supervolcano Nozzle: Difference between revisions
Jump to navigation
Jump to search
(Minor Clarification) |
(Added some more links under the "External Links" section) |
||
| Line 22: | Line 22: | ||
***+ Taxes and Shipping | ***+ Taxes and Shipping | ||
***( [[User: Eric]] here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version ) | ***( [[User: Eric]] here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version ) | ||
*[https://youtu.be/h0LxiKVpQHQ?si=xpKw9akiFfch4T1M A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ] ( '''~15 Minute Watch''' ) | |||
*[https://youtu.be/uYjzflA9Q5Y?si=VK__Avix4oG5a3Gq A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ] ( '''~4 Minute Watch''' ) | |||
**Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for [[Touch Probes]] and other [[Bed Leveling Probes]] etc | |||
[[Category: 3D Printing]] | [[Category: 3D Printing]] | ||
Revision as of 02:16, 2 September 2023
Basics
- Supervolcano is the fastest nozzle and extruder - capable of extruding up to 20 lb of material per day.
- (This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the Golliath Hotend
Clones
- Clones now exist on Aliexpress with 4 nozzles - $50 - [1]
- 0.4 to 1.2 mm supervolcanoes at $8.40 each - [2]
Shorter Long Nozzles
- 32 mm long - [3]
Internal Links
- Scalable Heater Block (OSE development to improve on the concept of the Supervolcano)
- Supervolcano Heater Block
- D3D Pro v20.07
- D3D v20.04.27
External Links
- The E3D Official Website/Store's Page on the E3D Supervolcano
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- $132.00 USD for the 12v Version and 119.00 USD for the 24v Version
- + Taxes and Shipping
- ( User: Eric here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version )
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ( ~15 Minute Watch )
- A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ( ~4 Minute Watch )
- Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for Touch Probes and other Bed Leveling Probes etc