Latest revision as of 03:58, 14 May 2024

Boxes

Single box is 2.25" wide [1] - meaning that a regular plate would cover up to a 0.25" gap around the box.

3.5x5.25 size [4]. Meaning it is about 0.6" larger than the box on the side.
- This means we can route around a box, then easily use a jumbo plate to cover the kerf with about 0.35" coverage beyond kerf - so it would likely cover small runout mistakes.
A midsize plate (3.1") is over 0.4" " larger on the side, meaning that it would also cover a 0.25" router kerf, but without much tolerance so runout mistakes would need correction.
A small plate - 2.75" - Would barely cover the perfect 1/4" kerf. Not doable.
More:
- This one says oversized plates are 0.75" taller and wider than regular [5] - compare to the standard above.
- Beware - not all jumbo is jumbo such as 3.3x5.1 [6]
- 3.5x5.1 [7]

@@ Line 18: / Line 18: @@
 =Work Doc for Routing Boxes=
-<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRy84kLGN6Y86zqu79bZOraIgtSzasjvmGqr4HIBEckskybcSop15QyxIsPF4ay-rTmrj26k5k3gnhl/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>
+<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRy84kLGN6Y86zqu79bZOraIgtSzasjvmGqr4HIBEckskybcSop15QyxIsPF4ay-rTmrj26k5k3gnhl/embed?start=false&loop=false&delayms=3000#slide=id.g2db78898bc0_0_0" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>
 [https://docs.google.com/presentation/d/1s5gIvejTcUfIEs09uzhcOh4ygYemDaVosFLBqeiJIG0/edit#slide=id.g2db78898bc0_0_0 edit]