1" Crown Staples: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
*Real world framing is 50 nails per minute in production. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac]. Needs 7.5 cfm per person. Limiting factor is? | *Real world framing is 50 nails per minute in production. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac]. Needs 7.5 cfm per person. Limiting factor is? | ||
**In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac] | **In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac] | ||
**{{check}}Solve time constraints by [[Measureless Design]], | **{{check}}Solve time constraints by [[Measureless Design]], [[3D Printing]] and [[Robotics]] for handling, and [[Poka-Yoke]] for positioning - and you have [[Extreme Design-Build]]. | ||
Revision as of 01:22, 12 July 2025
- Up to 15 fires per second in bump mode. [1]
- Practical controllable rate is 3-6 per second for long production runs. [2]
- Freeman PWC50 uses 13 cfm for 100 staples per minute at 90 psi. [3]
- Real world framing is 50 nails per minute in production. [4]. Needs 7.5 cfm per person. Limiting factor is?
- In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [5]
Solve time constraints by Measureless Design, 3D Printing and Robotics for handling, and Poka-Yoke for positioning - and you have Extreme Design-Build.
