CEB Press/Manufacturing Instructions/Detroit Fab Lab Solenoid Driver

The Detroit Fab Lab has provided a custom-manufactured board that offers the five solenoid driver outputs required by the CEB Press. The card plugs into the Arduino Breakout Shield. The Five pins used to drive the five solenoid connections are as follows:

• D11
• D10
• D9
• D6
• D3

Here is some sample source code to test the five connections. Warning: Connecting the drivers to the solenoid unit incorrectly can ruin the unit. In particular, you should watch the polarity of the connections and ensure that opposite sides of one hydraulic circuit are not turned on by the solenoids at the same time. It is recommended that the board be fully tested first and then connected to the solenoid drivers. After this, circuit connections should be double checked before operating the solenoids.

int pwm_a = 11;
int pwm_b = 10;
int pwm_c = 9;
int pwm_d = 6;
int pwm_e = 3;
int i;

void setup()
{
//
   pinMode(pwm_a, OUTPUT);
   pinMode(pwm_b, OUTPUT);
   pinMode(pwm_c, OUTPUT);   
   pinMode(pwm_d, OUTPUT);   
   pinMode(pwm_e, OUTPUT);   

   Serial.begin(9600);
}

void loop()
{
   
        fade_channel(pwm_a);
        fade_channel(pwm_b);
        fade_channel(pwm_c);
        fade_channel(pwm_d);
        fade_channel(pwm_e);
}

void fade_channel(int channel)
{
   Serial.println("Fading pwm channel to max: ");
        Serial.println(channel);
                
   for (i=0; i<=255; i++)
   {
      analogWrite(channel, i);
      delay(100);
   }

   Serial.println("pwm channel at max.");
        delay(1000);
        Serial.println("fading down.");
   
        for (i=255; i>=0; i--)
   {
      analogWrite(channel, i);
      delay(100);   
   }

   Serial.println("pwm channel at 0.");
        delay(1000);
}

digikey parts

Bill Of Materials for CEB Press Driver Shield v1.0

Qnty Description Part # URL

• 5 Power N MOSFET RFD16N05LSM9ACT-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=RFD16N05LSM9ACT-ND
• 5 Green LED 160-1169-1-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=160-1169-1-ND
• 5 Diode 641-1331-1-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=641-1331-1-ND
• 5 499 Resistor 311-499FRCT-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=311-499FRCT-ND
• 5 49.9k Resistor 311-49.9KFRCT-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=311-49.9KFRCT-ND
• 3 10k Resistor 311-10.0KFRCT-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=311-10.0KFRCT-ND
• 6 2 Pos Terminal ED1514-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=ED1514-ND
• 1 reset switch SW262CT-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SW262CT-ND
• 2 6 Pos Header A1913-ND http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=a1913-nd
• 2 8 Pos Header A1914-ND http://search.digikey.com/scripts/dksearch/dksus.dll?pname&site=us&lang=en&WT.z_cat_cid=Dxn_US_US2011_Catlink&name=A1914-ND
• 1 PCB