General Processes/Circuit Etching: Difference between revisions
Jump to navigation
Jump to search
(Created page with "There are a few different ways to etch a circuit board. if you'd like to add a different style please feel free add a section. == Toner Transfer == make circuit board (you can...") |
|||
| Line 4: | Line 4: | ||
== Toner Transfer == | == Toner Transfer == | ||
print the mirrored image on laser photo paper | print the mirrored image on laser photo paper | ||
Revision as of 02:10, 30 November 2011
There are a few different ways to etch a circuit board. if you'd like to add a different style please feel free add a section.
Toner Transfer
print the mirrored image on laser photo paper
tape the paper onto the copper board
using a laundry iron, heat the paper until discolored
soak in water and peel the paper away
agitate in pcb etchant solution for 20-30 min until copper is gone
using a #58 drill bit and drill press, drill all the holes
apply accetone to a cloth and wipe away toner
check and fix errors
places where not enough was etched away or where too much was