CEB Press Operation and Safety - video: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 6: | Line 6: | ||
[http://youtu.be/ckgIvfYlibo CEB Press ergonomics of use.] | [http://youtu.be/ckgIvfYlibo CEB Press ergonomics of use.] | ||
=Overview= | |||
http://www.youtube.com/watch?v=suxEJFXj1b4&feature=youtu.be | |||
<html> | |||
<iframe width="500" height="284" src="https://www.youtube.com/embed//suxEJFXj1b4" frameborder="0" allowfullscreen></iframe> | |||
</html> | |||
=Operation= | |||
For first time startup: | |||
#Check connections in the controller box and tighten with a screwdriver if necessary | |||
#Check connections from the controller to the solenoid valves | |||
#Connect power to the controller. | |||
#Upload CEB Testing Code to | |||
=Troubleshooting= | =Troubleshooting= | ||
If machine is not receiving hydraulic power, first check the flowchart for [[Hydraulic System Troubleshooting]]. | If machine is not receiving hydraulic power, first check the flowchart for [[Hydraulic System Troubleshooting]]. | ||
Then check the [ | |||
=Repair= | |||
2.5.4 [[Basic Troubleshooting Skills]]The CEB is designed for disassembly, meaning that many parts can be replaced readily from steel stock sections. We recommend a visit to a local metal fabrication shop to secure parts. All parts may be fabricated with a welder, See the exploded parts diagram for a complete list of parts and identify the part that is broken. | |||
[[Image:CEB_EPD.jpg]] | |||
Refer to the [[A-Z Instructionals]] or [[CEB Fabrication Drawings]] to identify the fabrication requirements for the part, and take the instructions to your fabrication shop. | |||
Revision as of 00:27, 27 December 2011
http://www.youtube.com/watch?v=suxEJFXj1b4&feature=youtu.be
Overview
http://www.youtube.com/watch?v=suxEJFXj1b4&feature=youtu.be
Operation
For first time startup:
- Check connections in the controller box and tighten with a screwdriver if necessary
- Check connections from the controller to the solenoid valves
- Connect power to the controller.
- Upload CEB Testing Code to
Troubleshooting
If machine is not receiving hydraulic power, first check the flowchart for Hydraulic System Troubleshooting.
Then check the [
Repair
2.5.4 Basic Troubleshooting SkillsThe CEB is designed for disassembly, meaning that many parts can be replaced readily from steel stock sections. We recommend a visit to a local metal fabrication shop to secure parts. All parts may be fabricated with a welder, See the exploded parts diagram for a complete list of parts and identify the part that is broken.
Refer to the A-Z Instructionals or CEB Fabrication Drawings to identify the fabrication requirements for the part, and take the instructions to your fabrication shop.