CEB Press Operation and Safety - video: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=Overview= | =Overview= | ||
Revision as of 00:33, 27 December 2011
Overview
http://www.youtube.com/watch?v=suxEJFXj1b4&feature=youtu.be
Operation
For first time startup.
The machine comes with
- Check connections in the controller box and tighten with a screwdriver if necessary
- Check connections from the controller to the solenoid valves
- Check that hydraulic hoses are tight and tighten if necessary
- Connect power to the controller.
- Upload CEB Testing Code to
Troubleshooting
If machine is not receiving hydraulic power, first check the flowchart for Hydraulic System Troubleshooting.
Then check the [
Repair
2.5.4 Basic Troubleshooting SkillsThe CEB is designed for disassembly, meaning that many parts can be replaced readily from steel stock sections. We recommend a visit to a local metal fabrication shop to secure parts. All parts may be fabricated with a welder, See the exploded parts diagram for a complete list of parts and identify the part that is broken.
Refer to the A-Z Instructionals or CEB Fabrication Drawings to identify the fabrication requirements for the part, and take the instructions to your fabrication shop.