Marcin Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 101: Line 101:




=12/16/11=
Click here for [[Marcin Log 9/26/11 - 12/16/11]]
*Distributive Enterprise*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//w75QqbktAmk" frameborder="0" allowfullscreen></iframe></html>
*Explanation of what Distributive Enterprise is and what the effects on the means of production, individuals and (potential) farmers/producers it has
*Already seen 3 independent replications of our Distributive Enterprise
*Explanation of funding, earnings, testing, goals and evolution
*Packages Involved:
*1 Open Source Microfactory Package
*2 Power Infrastructure Package
*3 Construction Package
*Explanation of OSE Fellows Program: for highly-motivated individuals looking to move Distributive Enterprise forward
 
 
 
* [http://youtu.be/Vp6gAEmETfk/ New Lifetrac hydraulic motor explanation]
 
 
 
=12/15/11=
*HabLab Roof Support with Floyd and John*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//WYHwxBL6dqE" frameborder="0" allowfullscreen></iframe></html>
*Explanation of general roof support process
*post anchors, squaring, columns, beams, framing, specifications, dimensions
 
 
 
*Practical Post Scarcity: Open Source Solutions*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//q9BW9E6omFQ" frameborder="0" allowfullscreen></iframe></html>
*Video produced by Marcin explaining about the solution to the artificial scarcity with the Open Source Ecology Global Village construction Set
*Explanation of some of the major parts in the GVCS that have already been created
*Breakdown of HabLab technology and philosophy
 
 
 
* [https://www.youtube.com/embed//xJ5SxlA4HYk/ Rafters Going Up with Floyd and John]
* [https://www.youtube.com/embed//oESfQH6Xowc/ HabLab Materializing]
 
 
=12/13/11=
*Tractor Wheel Valve Hydraulics Modification*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//HcoommI4Eis" frameborder="0" allowfullscreen></iframe></html>
*Power beyond fitting for main control valve from Lifetrac
*Marcin discusses the Lifetrac valve modification
 
 
 
=12/12/11=
 
*Transit 101--with Floyd and John*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//9cJ2vAnhbko" frameborder="0" allowfullscreen></iframe></iframe></html>
*Floyd and John discuss using Transit machine to line everything up
*John and Floyd describe how to use Transit machine
 
 
 
*Lathe Conversion to Hydraulics*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//J7JetivqHEo" frameborder="0" allowfullscreen></iframe></html>
*Marcin describes the lathe methodology
 
 
 
* [http://youtu.be/qvZleSm8aFI/ Pulverizer Disassembly in Top-Secret Restricted Area]
 
 
 
=12/11/11=
*Workshop Wall Details with Floyd*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//RnkVb0xL0Ro" frameborder="0" allowfullscreen></iframe></html>
*Discussing details (lengths, height, blocks, etc) of frames, walls and windows
 
 
 
*Spraying Step for Bricks (with Floyd)*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//RnkVb0xL0Ro" frameborder="0" allowfullscreen></iframe></html>
*Floyd details how to properly spray bricks with anti-freeze (for weathering) to activate clay and remove imperfections
 
 
 
*Column Laying Technique (with Floyd)*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//GsiKdM546ts" frameborder="0" allowfullscreen></iframe></html>
*Floyd demonstrates how to properly lay bricks for columns
*Patterns, layering, tie-ins,
 
 
 
* [http://youtu.be/MW0OYO0aMEs/ CEB walls coming up]
* [http://youtu.be/p2UGgO6noZc/ Shortening prototype 2 Lifetrac to make prototype 3]
* [http://youtu.be/T36vFWQ8VM8/ CEB Disassembly documentation]
* [http://youtu.be/p2UGgO6noZc8/ Shortening prototype 2 Lifetrac to make prototype 3]
* [http://youtu.be/tmN8Fx5hzwU/ Shortening prototype 2]
* [http://youtu.be/NuL4bX029yU/ Towards Lifetrac 3]
* [http://youtu.be/OAuiup5_Onw/ Gap in Lifetrac 2]
* [http://youtu.be/ENpdtk9fNsw/ Gap in Lifetrac]
* [http://youtu.be/oPDo-mjeM7Q/ Lifetrac 2 simple drive]
 
 
 
=12/10/11=
*Open source CAD/CAM Solution*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//fMmP_85yOWk" frameborder="0" allowfullscreen></iframe></html>
*Optimal solution for Open Source CAD/CAM Solution
*A team of 5 to 6 dedicated programmers and a project manager to head up team of designers with world-wide participation for feedback
*Would require under $500K budgeting a year
*5-person team minimum: 1 interface designer, one project designer, 3 or 4 programmers and one dedicated CAD professional
 
 
 
*HabLab Roof Installation Steps from Floyd*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mVVuRcMp8v8" frameborder="0" allowfullscreen></iframe></html>
*Detailed description from Floyd and Marcin about roof installation
*Includes columns, beams, cuts, roof anchors, bracing, chalk lines, squaring,
 
 
 
*Grinder Talk*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mkmlP5QASAY" frameborder="0" allowfullscreen></iframe></html>
*Using 9" grinder or smaller to cut blocks
*Diamond blade ideal
 
 
* [http://youtu.be/e5qwYkNPMWA/ CNC torch table height adjustment]
 
 
 
 
=12/9/11=
* [http://youtu.be/7F6m906Vn3M/ HabLab dry-in beginning]
* [http://youtu.be/-5nfJQJO2wQ/ Cutting hussars for tractor wheels with a bandsaw]
* [http://youtu.be/yQa0n5l1jGo/ Welding Lifetrac wheel collars]
* [http://youtu.be/e5qwYkNPMWA/ CNC torch table height adjustment]
* [http://youtu.be/-5nfJQJO2wQ/ Cutting hussars for tractor wheels with a bandsaw]
* [http://youtu.be/yQa0n5l1jGo/ Wellding Lifetrac wheel collars]
* [http://youtu.be/yQa0n5l1jGo/ Wellding Lifetrac wheel collars]
 
 
 
=12/8/11=
*Bottom CEB Layer and Electrical Integration into Wall*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//AwHi9AmV-qY" frameborder="0" allowfullscreen></iframe></html>
*Use of Mastic to glue together blocks
*Electrical system description
 
 
*Bottom Layer Blocks*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//iDolHTUxtN4" frameborder="0" allowfullscreen></iframe></html>
*John gives Tips n Tricks to cutting the blocks
 
 
 
*Burning Smoke for a Clean Flame*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//0zIiHp4vCto" frameborder="0" allowfullscreen></iframe></html>
*The process and details how to burn smoke for a clean flame
 
 
 
 
*Wally Munster and the Modern Steam Engine*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//n-ZgkgvZW7E" frameborder="0" allowfullscreen></iframe></html>
*Historical story of Wally Munster's contribution to the modern steam engine
*He now has the steam engine blueprints created by Wally Munster
*Discussing the details of the engine
 
 
=12/7/11=
*Steam Auto Club of America visits Factor e Farm*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mhE_3d3WSvs" frameborder="0" allowfullscreen></iframe></html>
*Discussing the Mike Brown engine: design and efficiencies
 
 
 
*Steam Generator*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//vwKtUrNffdM" frameborder="0" allowfullscreen></iframe></html>
*Steam generator from an Italian-made steam cleaner
*Efficiency of power-to-steam ratio
 
 
 
 
=12/7/11=
*Workshop Columns Beginning...FOR REAL*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//gKjdnxLzQec" frameborder="0" allowfullscreen></iframe></html>
*Filming of volunteers, job 'farming', high-tech paper, update and more
 
 
*Laying CEB Columns Below Zero*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//gKjdnxLzQec" frameborder="0" allowfullscreen></iframe></html>
*'EXTREME' brick-laying: sub-freezing temperature calls for (environmentally safe) anti-freeze in the slurry solution
*Another update for CEB Press controller
 
 
*Walls and Torch Tables*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//0C7kRv-X_t8" frameborder="0" allowfullscreen></iframe></html>
*Walls and window requirements
*Discusses how easy it is to learn/teach somebody the process
 
 
 
* [http://youtu.be/U5QdsFsSw_g/ Stepping stone for workshop]
* [http://youtu.be/6Og_xB02ILQ/ Roof cement foundation coating]
* [http://youtu.be/LBsHqkU0XIQ/ Workshop walls subzero:'EXTREME' wall-building]
* [http://youtu.be/EjyRLEoeN4I/ Window frames]
* [http://youtu.be/13M52fw-1HA/ Tractor in pieces]
* [http://youtu.be/0Q9XiVbSCv0/ Tractor and wall build/Dance Party]
* [http://youtu.be/D37hvba_ks8/ Heater and tractor]
* [http://youtu.be/i7g-PTCuPSU/ Sawmill]
* [http://youtu.be/vPhgdCYHPAI/ Sawmill 2]
* [http://youtu.be/Pxiss1Rc2pg/ Sawmill 3]
 
 
 
 
 
=12/5/11=
*CEB Solenoid Driver--Surface Mount 1*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//0D3Z_63ABnQ" frameborder="0" allowfullscreen></iframe></html>
*The process to make the controller for the Compressed Earth Brick (CEB) Press
*Step-by-step instructions--continuation videos below
* [http://youtu.be/9xNVYiU1Yw4/ Part 2]
* [http://youtu.be/DjMVsdlu-8I/ Part 3]
* [http://youtu.be/l065TakUwto/ Part 4]
* [http://youtu.be/s1pLeismEHs/ Part 5]
* [http://youtu.be/bmPgI_TTRyM/ Part 6]
* [http://youtu.be/uPP5Nu2ejNc/ Part 7]
* [http://youtu.be/fN_ZFsioekY/ Part 8]
* [http://youtu.be/nH_ywW_bIdU/ Part 9]
* [http://youtu.be/DtZmwgOglCY/ Part 10]
* [http://youtu.be/pxUABikBfd0/ Part 11]
* [http://youtu.be/xMB2bFHyhtw/ Part 12]
* [http://youtu.be/8TGLlu8lhTE/ Part 13]
* [http://youtu.be/Egt4-GXERcA/ Part 14]
* [http://youtu.be/_hCY2pX6CHo/ Part 15]
* [http://youtu.be/_qJEOG4tN00/ Part 16]
* [http://youtu.be/N20za3ao9LA/ Part 17]
* [http://youtu.be/vUHHzordAD0/ Part 18]
* [http://youtu.be/Es6dbl8YWAg/ Part 19]
* [http://youtu.be/QjMDBCSKydk/ Part 20]
* [http://youtu.be/FI_UI1hQdxs/ Part 21]
 
 
 
=12/4/11=
*Taking CEB Press Apart for Documentation*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//VLndfV5ZA0w" frameborder="0" allowfullscreen></iframe></html>
*The guys get silly as they document the taking apart of a CEB Press
*"Nothing short of epic"
 
 
 
* [http://youtu.be/-UpMnhPkiQ0/ Tractor Disassembly video]
 
 
 
=12/3/11=
*Kohler mount - 2" longer*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//IbXHsCu3Ot8" frameborder="0" allowfullscreen></iframe></html>
 
 
 
*Fitting issues on Kohler Engine*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Q9aPwBVXzig" frameborder="0" allowfullscreen></iframe></html>
*Kohler engine mods: simple mod to raise motor platform by 2 inches
 
 
*Dirt and Twigs to Advance Civilization*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//1gbXiB4GZJw" frameborder="0" allowfullscreen></iframe></html>
*Marcin discusses his dreams for the project: to use the resources around him to transform modern life; "let's make it happen"
 
 
 
=12/2/11=
*Ian and Yoonseo Discussing Plans*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//YndnPWluIxo" frameborder="0" allowfullscreen></iframe></html>
 
 
 
*Dec 2 last Day pressing*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//ckgIvfYlibo" frameborder="0" allowfullscreen></iframe></html>
 
 
*Sliding roof metal up*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//wXtvmxG9CQM" frameborder="0" allowfullscreen></iframe></html>
*Sliding roof metal up
*Marcin and Floyd talk about the best/most-affordable tools to buy
 
 
*Lifetrac Test Drive*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//wzpAEca1NA0" frameborder="0" allowfullscreen></iframe>></html>
 
 
 
*Meeting on CEB Preparation for October*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//T36xkGt8VaQ" frameborder="0" allowfullscreen></iframe></html>
*Work for October assigned
 
 
 
* [http://youtu.be/zGD-mdN-owA/ View from roof of work being done]
* [http://youtu.be/1W1ZfxagRjs/ Another angle of roof going on]
* [http://youtu.be/rfkB5u2akSg/ Sliding roof panels up]
* [http://youtu.be/VydOgO4mu_g/ Rollers coming off the production line]
* [http://youtu.be/oYkWsYgxjlg/ HabLab prep]
* [http://youtu.be/kpzldZleznk/ Lifetrac moving rebar and bending table into place]
* [http://youtu.be/HO2ps3MWdsU/ Lifetrac weight balancing]
* [http://youtu.be/Sr2kdsh1iIQ/ Filling Lifetrac with gas]
* [http://youtu.be/uqc8CbyKcc0/ Loading Lifetrac up]
* [http://youtu.be/xBD31-euJko/ Moving materials to HabLab site]
* [http://youtu.be/8M2XdJ48i_I/ Loading rebar]
* [http://youtu.be/Uvh-b8X1nMs/ Cutting roof metal]
* [http://youtu.be/k7xX5yQ4660/ Rebar load on tractor]
* [http://youtu.be/c-iXRkAE_cE/ Loading rebar on tractor 2]
* [http://youtu.be/lVA48sBGIBI/ Bent rebar on tractor]
* [http://youtu.be/ZqE27aBfY3U/ Welding battery tabs]
* [http://youtu.be/ZqE27aBfY3U/ Welding battery tabs]
 
 
 
 
=12/1/11=
*Stabilizing Limestone Blocks*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//u6HLSOjAqqk" frameborder="0" allowfullscreen></iframe></html>
*Floyd created method for stabilizing purely limestone bricks
 
 
*Thursday, December 1 UPDATE*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//9awxKoHh85k" frameborder="0" allowfullscreen></iframe></html>
*Overview panorama
*Roof almost ready to go on
*Overhang is about 4"
*Framing explanation
 
 
*Brick Rollers*
<html><iframe width="420" height="3L15" src="https://www.youtube.com/embed//8U2yO25Kne4" frameborder="0" allowfullscreen></iframe></html>
*Setting up brick rollers and space for CEB Brick Press
*
 
 
* [http://youtu.be/QJkLiE2bwi0/ Roof metal beginning to go on]
* [http://youtu.be/vkcSMHR0FUk/ Roof going up]
* [http://youtu.be/Af03NYF1WV4/ James Slade on shaker motor safety plate]
* [http://youtu.be/R611rt9rn5A/ Bobcat conversion plate mounts (onto) pulverizer]
* [http://youtu.be/6co62hwFxfE/ Bobcat to Lifetrac conversion plate]
 
 
 
=11/29/11=
* [http://youtu.be/4j-qbO1WeCQ/ Bobcat to Lifetrac conversion plate]
* [http://youtu.be/RMtb8BDZL6M/ Pulverizer on conversion quick attach]
 
 
 
=11/28/11=
*Moving Roof Boxes Onto Roof*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//UU5fn9QHHoI" frameborder="0" allowfullscreen></iframe></html>
*Plans coming together
 
 
*Moving Roof Boxes Panorama*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//STITPQC7wF8" frameborder="0" allowfullscreen></iframe></html>
 
 
*Brick City*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//SFrECttMxEE" frameborder="0" allowfullscreen></iframe></html>
*Tarp removal to allow for bricks in `Brick City` to dry
*Lettin' it all dry out
 
 
*Lifetrac Upgrades*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//hICQOCHkDsk" frameborder="0" allowfullscreen></iframe></html>
 
 
 
*Power Cube Connection to Tractor*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//nNVVfaXQ3W0" frameborder="0" allowfullscreen></iframe></html>
*Connecting power lines from Power cube to valves
*2 return lines
*Check valves to ensure multiple Power Cubes employed don't fight each other
 
 
 
* [http://youtu.be/NRX7e39psag/ Fredrick Emmons Earth Burm biotecture]
* [http://youtu.be/8OZleuMZRRw/ Pushing roof sections onto workshop]
* [http://youtu.be/Gv9WEuerAKw/ Monday morning workshop update]
* [http://youtu.be/5vEK7CQoWV8/ Unloading plywood and framing]
* [http://youtu.be/4vEXUAUv9OQ/ One minute video of 4" brick pressing]
* [http://youtu.be/rEgkIXtFk6k/ Lifetrac dismounting wheels]
* [http://youtu.be/hLVOX7ckz2E/ Another minute of shaker]
* [http://youtu.be/kNU0mq-DbZc/ Bobcat exploded?]
* [http://youtu.be/b2V77e659sU/ Aftermath of Bobcat explosion]
* [http://youtu.be/hA1eBPKkTv8/ Reinforcing CEB compression chamber]
* [http://youtu.be/W-R6ourC2LU/ Reinforcing CEB compression chamber 2]
* [http://youtu.be/WdBGzQUMd4g/ Brick pressing and roller setup]
* [http://youtu.be/b4kTMcnp1tw/ Grate modification]
* [http://youtu.be/PUrnUKQQL9Y/ Brick mudding and laying]
* [http://youtu.be/77uueUvhzU0/ Early days brick laying]
* [http://youtu.be/Dg_K5RlKvFk/ Soil Pulverizer overview]
* [http://youtu.be/mJLojvhpizg/ Replacing solenoid driver board on CEB]
* [http://youtu.be/ATgOE3kt05c/ Moving Soil Pulverizer into shop]
 
 
 
 
=11/26/11=
*Loader Mounted Cement Mixer Results*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//NGFP_MUik9A" frameborder="0" allowfullscreen></iframe></html>
*Modication needed
 
 
*Intro on Cement Mixer*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//XnYVmhIhFv0" frameborder="0" allowfullscreen></iframe></html>
 
 
 
*Perfect Day for Pressing Bricks*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//nD9PlliLqsQ" frameborder="0" allowfullscreen></iframe></html>
*Marcin and Floyd making the best use of bad weather
*Brick pressing under cover
 
 
* [http://youtu.be/_xc_Owf83uo/ Loading soil without pulverizer]
* [http://youtu.be/4G2DiAo3fOA/ Loading hopper straight from loader]
* [http://youtu.be/BsEM3tlatPc/ Shaker Function]
* [http://youtu.be/eYVUaPwwqZ4/ 1 minute of pressing]
* [http://youtu.be/VV2QdjUj17g/ 1 minute of pressing (2)]
* [http://youtu.be/i6M4pxK3qdo/ Cement mixer in action]
* [http://youtu.be/1moX6--taIw/ Mixer lid closed]
* [http://youtu.be/2kmtixaM2_k/ Loading cement mixer]
* [http://youtu.be/CPwmD9jtWtg/ Attaching mixer to Bobcat]
* [http://youtu.be/Q5Eldy2GgNM/ Another miute of pressing]
* [http://youtu.be/EUK0hk1TTaY/ Shaker and Stacking]
* [http://youtu.be/1la87nE_j6c/ Loading soil without pulverizer]
* [http://youtu.be/Xq_YVINGm9o/ Shaker detail]
* [http://youtu.be/MwNaRa-rayw/ Shaking soil down CEB machine]
* [http://youtu.be/5yrc0-UwZMg/ `nother minute of pressing]
* [http://youtu.be/q7t6ouSXRw8/  First use of the workshop for modification of Lifetrac]
* [http://youtu.be/MgnJVVWG2Qc/  James Slade from Texas]
* [http://youtu.be/MgnJVVWG2Qc/  James Slade from Texas]
 
 
 
=11/25/11=
*Floyd Details Workshop Alignment Methods*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//tGGUcKYeX2o" frameborder="0" allowfullscreen></iframe></html>
*Techniques and tools to perfectly align workshop
*Level, chalk line and string line instructional
*Patterns to ensure level alignments
*Use of cripplers for beam and box installation
 
 
*Floyd Talks about Reject Lime Being Used to Press Bricks*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//3zGK9ak7u2I" frameborder="0" allowfullscreen></iframe></html>
*Possible use for reject lime, to make blocks for weather-facing exterior perimeter foundations (cheaper)
 
 
 
*Floyd Describes Column Prototype*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Azs4HdSz4vw" frameborder="0" allowfullscreen></iframe></html>
*2x2 foot hollow column prototype design to be filled in
 
 
 
*Current Construction Scene*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//amwwNMnRF2k" frameborder="0" allowfullscreen></iframe></html>
 
 
 
* [http://youtu.be/LDpMoWSP1_o/ Putting roof sections on the workshop]
* [http://youtu.be/Hoq8qHA0jaw/ Roof sections lean on roof]
* [http://youtu.be/0iNfMP_UUkg/ John the Carpenter discusses progress and forecasts roof rafters up next week (weather providing)]
* [http://youtu.be/SBWqL9GZzhg/ From pulverizer to brick]
* [http://youtu.be/Sv5u0uRKJes/ Pulverizer munching soil]
* [http://youtu.be/B_33-2wbubI/ From pulverizer to brick line]
* [http://youtu.be/dovUkRg3XIs/ 1600 Bricks pressed (4.5 bricks per minute consistently)]
 
 
 
 
=11/24/11=
*Testing Report for Field Pulverizer*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//BcnsV_a-Nx0" frameborder="0" allowfullscreen></iframe></html>
*Modifications and issues from Field Pulverizer tests
*Safety recommendations from Marcin for safe Field Pulverizer use
 
* [http://youtu.be/rHHYDZ1OALg/ Workshop roof preparation construction]
* [http://youtu.be/gw91-IExCn4/ Temporary post use]
* [http://youtu.be/29crGlUM4YA/ Simultaneous action of CEB Presses]
* [http://youtu.be/KyIldsuzp7g/ Getting cement mixer up and running]
* [http://youtu.be/s3bVxYNM1Co/ Brick City, repository or bricks for storage from elements]
* [http://youtu.be/o83wkO9ep6w/ Windrows of dug-up soil for brick pressing of 2,000-3,000 bricks]
* [http://youtu.be/2GwBRRFvptw/ Reject limestone soil use]
* [http://youtu.be/gTSuoFJ5dCs/ Leveling workshop frame questions]
* [http://youtu.be/ydI7FxrkN4M/ Workshop skeleton panorama]
* [http://youtu.be/_f-Ou_sHCoQ/ Strawbales and shop]
 
 
 
=11/23/11=
*Roof Anchoring with Floyd*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//5iMBFjGXPf8" frameborder="0" allowfullscreen></iframe></html>
*Floyd discusses anchoring the structures for the upcoming roof build
 
 
 
=11/22/11=
*Floyd Discussing Structural Stability*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//WEFT8SlYhRA" frameborder="0" allowfullscreen></iframe></html>
*Floyd discusses bracing, support triangles and tying in preparation for Roof Boxes
 
 
* [http://youtu.be/xZubqUuM9Xw/ Next steps to the roof with 30-year carpenter industry veteran John]
* [http://youtu.be/I98uh3hSjWQ/ Construction scene review]
 
 
 
*Workshop Status with Floyd Hagerman*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//m6tyXguzWKs" frameborder="0" allowfullscreen></iframe></html>
*Floyd discusses interim progress on workshop build and upcoming element builds
 
 
 
=11/16/11=
*CEB Construction Review and Problem Solving*
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//T9KWd42saQg" frameborder="0" allowfullscreen></iframe></html>
*Experienced builder Floyd Hagerman brings 20-years of experience to CEB project
*Addresses structural and moisture issues of troublesome wall on build
*Floyd discusses important details about weatherizing exposed walls and fixes for existing issues
 
 
* [http://youtu.be/NY3Calnx1_4/ CEB Press fitting crack]
 
 
=11/14/11=
* [http://youtu.be/-IZbfHQSPCs/ Prepping for columns build]
* [http://youtu.be/9GqI_ZxHlPw/ Reinforcing main compression chamber]
 
 
 
 
=11/13/11=
* [http://youtu.be/egs-694TKJo/ Moving lumber for roof boxes]
* [http://youtu.be/DA7RfwVl7Fc/ Moving lumber for roofs]
* [http://youtu.be/-IZbfHQSPCs/ Preparing to build columns]
* [http://youtu.be/9GqI_ZxHlPw/ Reinforcing main compression chamber]
 
 
 
=11/13/11=
*Yoonseo Gives Tutorial on Laying Bricks for the Columns
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//69x5sj-ZA9g" frameborder="0" allowfullscreen></iframe></html>
*Yoonseo explains the proper use of slurry, brick laying techniques and proper patterns
*Finishes with a Q&A where Yoonseo fields questions as to why brick patterns and proper technique are necessary
 
 
 
=11/12/11=
*Problem with Nov 12 Pressing
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//fOOeourIcvk" frameborder="0" allowfullscreen></iframe></html>
*Rain without sun left the soil wet, putting a damper on the scheduled pressing
 
 
*Bridging Issue
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//8EchEIGiFt4" frameborder="0" allowfullscreen></iframe></html>
*Wet soil causing problems with bridging
*The painfully slow, yet effective, 'poking-it-with-a-stick' methodology keeps project on track but behind schedule
 
 
 
* [http://youtu.be/IJfO5lxxw5Q/ Meeting of the CEB presses]
* [http://youtu.be/5wpn9a4j55E/ Powell machine arrives to the site]
* [http://youtu.be/OF7YVy-Qwlk/ Powell CEB Press creating different sized blocks]
* [http://youtu.be/qOY_Xo2tmdg/ Moving Powell machine while on site]
* [http://youtu.be/NFy--yXpCLE/ Visual of pressing machine at work]
* [http://youtu.be/NDGY5BfXW0w/ Bricks finished being loaded onto pallets]
* [http://youtu.be/ut4-i1ckODQ/ Forklift moving pallets of pressed bricks]
 
=11/11/11=
*Prototype 1 Loader Mounted Cement
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//lKCTLTGP7nw" frameborder="0" allowfullscreen></iframe></html>
*Visual of Prototype 1 and its quick attach motor, Lifetrac standard, large internal paddles
* [https://www.youtube.com/embed//0V2Au1gTpqo/ Additional visual]
 
 
 
=11/05/11=
*Workshop Columns Assembly
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//SpnnjVi5oiY" frameborder="0" allowfullscreen></iframe></html>
*Column construction coming along nicely
 
 
 
*Words of Wisdom from Yoonseo
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Z3BNZqqnZqo" frameborder="0" allowfullscreen></iframe></html>
*A wonderfully eloquent soliloquy about what brought Yoonseo to the Factory Farm project
 
 
=11/04/11=
*Workshop Slab
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//6l2wj3JLgME" frameborder="0" allowfullscreen></iframe></html>
*2/3 of the slab is finished
*Description of the final details and pour to complete the concrete slab
* [http://youtu.be/YzCLLUKfcS0/ concrete slab joints cutting visual]
* [http://youtu.be/iTR0VRkYEIc/ Release cut ergonomics]
 
 
 
=10/29/11=
*Saturday the 29th--Update
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Ccxy64s-fbY" frameborder="0" allowfullscreen></iframe></html>
*Short update--continuing pressing
 
 
 
 
*CEB Micro-controller Repair
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Bpv708wMK3I" frameborder="0" allowfullscreen></iframe></iframe></html>
*Micro-controller repair of accidentally-broken solenoid on the CEB press
* [http://youtu.be/GPndXtIpmaA/ Solenoid repair]
 
 
 
=10/27/11=
*CEB Workflow
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//UW6-CET8GQg" frameborder="0" allowfullscreen></iframe></html>
*Short update on the brick laying process
 
 
 
*Pressing Grates
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//DG90LJvDA7I" frameborder="0" allowfullscreen></iframe></html>
*Short update on the work site
*realization that a grate modification is needed
 
 
 
=10/24/11=
*Brick Pressing in Production
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//sGarCTDiEcw" frameborder="0" allowfullscreen></iframe></html>
 
 
 
*Shims
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//bahhYtxy4Zg" frameborder="0" allowfullscreen></iframe></html>
*Brianna documents the importance of using 'shims' while welding
 
 
 
*Remote Technical Documentation
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//X-QJXrqL8h8" frameborder="0" allowfullscreen></iframe></html>
*Video documentation from Rebecca regarding her and Brianna's build
*Brianna working on written documentation
*Help with CAD documentation needed for clarification with computer modeling
 
 
 
*Power Cube Power and Return
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//aokPNqd8YJI" frameborder="0" allowfullscreen></iframe></html>
*Power lines from Power Cubes explanation
 
 
 
*Case Drain Returns on Tractor
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//9ggPiMzIDO4" frameborder="0" allowfullscreen></iframe></html>
*Case drain return, a low fluid line connecting the 4 motors
 
 
 
*Pressure Relief Instructional
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//1dlLtHt-Pd4" frameborder="0" allowfullscreen></iframe></html>
*Rebecca and Marcin show how to properly set the pressure relief PSI settings
 
 
 
*Properly Installed Drawers
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//cIkqryssZ7o" frameborder="0" allowfullscreen></iframe></html>
*Brianna shows what the finished project should look like
*Tips on how to fix any misalignment mistakes
 
 
 
*How-To Install Drawers
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//xzoen7x46qI" frameborder="0" allowfullscreen></iframe></html>
*Brianna's step-by-step how-to on the drawer installation
*Tips on mounting to the rollers correctly, a rather tricky process
 
 
*Progress on CEB Press
<html><iframe width="560" height="315" src="https://www.youtube.com/embed//YLZKFp9o23g" frameborder="0" allowfullscreen></iframe></html>
 
 
 
* Bobcat to Lifetrac Conversion Video Instructions
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//s1SR7zCtbxQ" frameborder="0" allowfullscreen></iframe></html>
* [http://youtu.be/w3N140FDoas/ Step 2]
* [http://youtu.be/q7jX78Kv240/ Step 3]
* [http://youtu.be/HCiW9BDr_rY/ Step 4]
* [http://youtu.be/x2r6Y--Pw_g/ Step 5]
* [http://youtu.be/O_576r--oEo/ Step 6]
* [http://youtu.be/Xx_IoEcpAXY/ Step 7]
* [http://youtu.be/x7M7NxJDvfg/ Step 8]
* [http://youtu.be/SXadyj7HVI8/ Step 8.5]
* [http://youtu.be/tbhqfMHaAxc/ Step 9]
* [http://youtu.be/yHuiL5eZHs8/ Step 10]
 
 
 
=10/20/11=
*Oct 20, 2011 UPDATE*
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//4XyvuB367rE" frameborder="0" allowfullscreen></iframe></html>
*Have rollers for earth brick press
*Rented a Bobcat for 1 month--will attach a conversion plate between Lifetrac and Bobcat to run sol pulzeriver, Power Cube and CEB Press
*Need solution for couplers snapping under pressure
 
 
 
''' Bobcat meets Conversion Plate meets Pulverizer
'''
* Soil Pulverizer on Bobcat
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Hd7qwOxxuzI" frameborder="0" allowfullscreen></iframe></html>
 
* [http://youtu.be/Zx-pZm0btKc/ Pulverizer mounts on Bobcat]
 
 
* Bobcat meets Pulverizer
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//eSm4fifkT0M" frameborder="0" allowfullscreen></iframe></html>
 
* [http://youtu.be/FBjquZyQUHs/ Bobcat to Lifetrac conversion plate]
* [http://youtu.be/dBQn3DJUaT0/ Recovery plan on CEB construction]
* [http://youtu.be/09_tRox7wEs/ Placing CEB press in position]
 
 
 
 
=10/18/11=
* Oct 18th Update
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//mpJ2RvpCx_Y" frameborder="0" allowfullscreen></iframe></html>
 
* Update for True Fan supporters
* 6K for Kickstarter campaign with 30 days to go
* Main focus currently is mounting the pulverizer onto the tractor--plan B should the 3 tractors not hold up is to rent bobcats and create conversion plate
* New equipment protocols coming online, including cement  mixer and sawmill
 
 
 
=10/17/11=
* Shuttleworth Fellowship Brief
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//h8-YA5KqsE4" frameborder="0" allowfullscreen></iframe></html>
 
* Marcin describes the ideology, current and on-going projects of GVCS and the future goals and plans for the Shuttelworth Fellowship committee.
 
 
 
=10/15/11=
* Power Cube Tabs Connecting to Tractor
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//0FaBXwgp5dw" frameborder="0" allowfullscreen></iframe></html>
 
* Tab-mounting instructions for mounting Power Cube to the frame of Lifeterac
 
 
 
* Lifeterac Motor Coupler Failure
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//i4GjoFQ3zsg" frameborder="0" allowfullscreen></iframe></html>
 
* Keywheel on Lifeterac snaps coupler
* Remedy to have new couplers made by shop on Monday
* Instructions on how to remove difficult wheelshafts and coupler
* [https://www.youtube.com/embed//jPnKrAnEW88/ Welding Lifeterac Mufflers]
* [https://www.youtube.com/embed//3dldfw36B-I/ Welding Remaining Mufflers]
 
 
 
* Power Cube Wiring 2
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//KscQM0MevXE" frameborder="0" allowfullscreen></iframe></html>
 
* Instructions on connecting wiring
 
 
 
* Oct 15 Update
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//hmXBRe_zhXQ" frameborder="0" allowfullscreen></iframe></html>
 
* Tractor issues: snapped couplers on wheel motors by forgetting to adjust pressure on main hydraulic line
* Reducing from 3,000 PSI to half that, for safety
 
 
 
* Pouring Concrete Foundations
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//JC2s6F3v8yE" frameborder="0" allowfullscreen></iframe></html>
 
* A panorama view of the concrete pouring
 
 
 
=10/14/11=
* Moving Rebar to HabLab Site
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//nNQ20gRrHns" frameborder="0" allowfullscreen></iframe></html>
 
* Using OSE Tractor to move rebar to site
 
 
 
* Foundation Pouring Series
* Ready to pour HabLab foundations
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//Hg9RVcB-lKk" frameborder="0" allowfullscreen></iframe></html>
* Foundations for HabLab ready to pour
* Overview of final foundation constructions
* [https://www.youtube.com/embed//P9bm50ghdHc/ Floating]
* [https://www.youtube.com/embed//CHdol5WWtuk/ Pour Sock]--first slab flattened, pouring second
* [https://www.youtube.com/embed//xULhiNT9qzU/ Beginning to Pour]--pouring concrete for first slab
* [https://www.youtube.com/embed//frp9SLWQIlw/ Little Dry Quick Fix]--"Little dry so were adding 5 gallons of water"
* [https://www.youtube.com/embed//YcwCEz3tu14/ 8 Cubic Yards]--pour of 8 cubic yards, 7.5 for slab
* [https://www.youtube.com/embed//uwem0DyHcqc/ Cool panorama shot of the Pour]
 
 
 
 
=10/14/11=
 
*HabLab rebar and embodied energy
<html><iframe width="420" height="315" src="https://www.youtube.com/embed//usnjQIsWLgI" frameborder="0" allowfullscreen></iframe></html>
 
 
* 10-man team pulls all-nighter to finish outside forms (average 6 people for 18 hours = 108 manhours)
* view of completed layout with forms
* retaining wall and forms completed and rebar layed
* ready to pour concrete
 
 
 
=10/13/11=
* Preparing the for [[HabLab]] Wall Foundations.
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//5P5JemNBdTg" frameborder="0" allowfullscreen></iframe></html>
 
 
=10/10/11=
* We are finally kicking off our Kickstarter to go The Last Mile on the construction part of the Global Village Construction Set:
** http://www.kickstarter.com/projects/622508883/global-village-construction-set
 
* Construction Planning Meeting
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//VsHbNEVeudg" frameborder="0" allowfullscreen></iframe></html> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//6CNMuBXIaAA" frameborder="0" allowfullscreen></iframe></html>
 
 
=10/09/11=
* [http://blog.opensourceecology.org/2011/10/dear-true-fans-october-9-update/ Dear True Fans: October 9 Update]
<html><iframe src="https://player.vimeo.com/video/30301005?title=0&amp;byline=0&amp;portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe></html>
 
 
=10/07/11=
 
* Soil Pulverizer Prototype 3
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//uK_pra4YORc" frameborder="0" allowfullscreen></iframe></html>
 
 
* Cost: 1215 in labor, 25h at 50 dollars/h + 750 in materials.
* Pulverizes and loads the soil in 1 step!
* This device replaces a stationary pulverizer plus a conveyor (both about 20000 dollars).
 
 
* [[Ted Mosher]] arrived today:
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//0ABIIAxpbcw" frameborder="0" allowfullscreen></iframe></html>
 
 
 
* [http://www.youtube.com/user/marcinose#p/u/15/vEbowMaDAuY CEB Controller Wiring explanation] - check the 6 parts.
* [http://www.youtube.com/watch?v=-UYuw-Dei2Q Hydraulic Hack]
* [http://www.youtube.com/user/marcinose#p/u/7/1aXzcXhghnU 4 CEB Presses, finishing] - 2-3 of them for construction.
 
* Documentation evolving
** Upload immediately to youtube from an iPhone
** People can access it and make instructionals, [[Ian Midgley]] will share how to do it.
** The more material we have, the more material people can choose.
** We write down the procedure in the Wiki
** [[Howard Agnew]] writes the actual scripts remotely.
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//H-Ss3_uCsHw" frameborder="0" allowfullscreen></iframe></html>
 
 
* OSE HabLab - 8 minutes to build a platform, [http://www.youtube.com/watch?v=cTdgHadNoHM Beginning to stack bales on platform]
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//bLQZGGkvSdQ" frameborder="0" allowfullscreen></iframe></html>
 
 
* [http://www.youtube.com/watch?v=72JyOqY7G8I Temporary strawbale structure], [http://www.youtube.com/watch?v=1RKE6GfPobA stacking strawbales]
** See [[Temporary Hay House]], 1h to build.
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//HiFGgS33vDk" frameborder="0" allowfullscreen></iframe></html>
 
 
* [http://www.youtube.com/watch?v=qaa3-NI-F58 Bailing results], [http://www.youtube.com/watch?v=jVQK_uc0bag On trailer to pick up bales], [http://www.youtube.com/watch?v=dZxhtV8Pz8c Picking up bales]
 
=10/05/11=
 
* [http://www.youtube.com/watch?v=C0kosot_EMo Ergonomic analysis of excavation] - 500 sqm with foundation pads
** For excavation 4000 dollars for 4 days of labor.
*** Day 1 - 4h bulldozing with CAT D7, 4h trackhoe.
*** Day 2 - 9,5h excavator (all 10 hours of labor), 3h skid loader
*** Day 3 - 11h excavator, 3h bulldozing, 6h skid steering with Bobcat
*** Day 4 - 1h excavator, 3h skid steer
*** Fuel: bulldozing 10gal/hour, excavator 4gal/hour, Bobcat 3gal/h
 
* [http://www.youtube.com/watch?v=C_XzT1yaIWs Baling and House construction ergonomics]
** Baling ergonomics: 3h for 100-200 bales. Issues with the length of bales.
** House construction ergonomics - 3h to pour 40 pads, 7 cubic yards of concrete, 6 people working. 6x3 = 18 human hours.
** Ergonomics of preparing the forms - 0.5h per pad, 40 pads = 20 hours. Leveling them off. So about 1h for each pad = 40h for all pads. Work: lay the form out, do the rebar, put the rebar in, dig out a little bit, put some gravel and [http://www.youtube.com/watch?v=H652WEcRsDY leveling].
 
* [http://www.youtube.com/watch?v=c3CclAb_ync Cement truck arrives] and pours cement in the Foundation pads.
** Side comment: For the foundation pad construction: 20 minutes per pad, to put it in form and put in the metal. With 1-2 people.
* [http://www.youtube.com/watch?v=-_LG5mJ-Z8E Muffler design]
** Parts: steel pipe and insert with about 40 holes, 7 inches long, 6 inches on the inside, 1 inch from the base. With modular pipe fittings.
 
* [http://www.youtube.com/watch?v=-G1u7qDQvUw Getting ready to bale ], [http://www.youtube.com/watch?v=jDgyp99So_Y Baler adjustment], [http://www.youtube.com/user/marcinose#p/u/51/aGSAbszJIfc Engaging the baler]
** We are not using LifeTrac because all of the wheel control valves are broken. Will get new one, but a new delay.
** Good news: Saw mill blade ordered, 1000 dollars.
** We need a Farmer!
** Baler Discussion
*** Big wheel and a fly wheel - we can replace it by hydraulics.
*** Auger, the pick up mechanism, and String tie mechanism.
** [http://www.youtube.com/user/marcinose#p/u/49/B6Ik81o_Y2s Straw quality assessment] - dry, crispy,
** [http://www.youtube.com/user/marcinose#p/u/48/V50L9ZFkYX4 First bale!], [http://www.youtube.com/user/marcinose#p/u/47/fnmD1zLIyOk Baling shakedown in progress]
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//V50L9ZFkYX4" frameborder="0" allowfullscreen></iframe></html> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//GVJeMyw6Qf4" frameborder="0" allowfullscreen></iframe></html>
 
 
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//-2Jo1aU3pYw" frameborder="0" allowfullscreen></iframe></html>
 
 
* Baling day 1 summary
** 3 bales/minute, 180/hour, about 1500/day. 1 bale is sold for 3 dollars = about 5000 dollars per day.
 
=10/03/11=
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//A2h_qzPBJJw" frameborder="0" allowfullscreen></iframe></html>
 
 
* OSE Certification
** Power Cube Producer - [http://blog.opensourceecology.org/2011/10/starting-project-visit/ Tom Griffin] from Texas, 1st replication, aiming for OSE Certification.
*** OSE provides Marketing assistance, publicize in our networks
*** He is contributing back to the community.
** OSE License relates to the [[OSE Specifications]], features the OSE products embody.
** Certified people will comment and describe how their product meets each point of the OSE Specification. It will be transparent for the user if he gets a product from somebody else or us, so he know exactly what he is getting, particularly on a life-time design and modularity aspects of our equipment. The world benefits by knowing what they are getting into, and the certified producer benefits by the having access to our marketing channels.
** OSE License is for building a distributing economics. It is not for us building an empire, but for us distributing as much productive power to everybody out there as possible.
*** To support the open sourcing of civilization, the producers would contribute a reasonable amount back to the OSE project, like 3%, we will have to decide on that, we don't want to overtax them, but a little kickback to the project to continue further open source development.
*** We will custom design these agreements, it will on a case by case basis.
** With this OSE distributive economics license we focus on the fact that whoever is a producer is documenting the work completely, meaning the bills of materials and designs and they will pass our mark only when they are truly bringing about distributive economics for the whole world to benefit with. And that's a beautiful package that nobody can disagree with, that can get a lot of public support on many fronts.
** That's about the OSE License, we will keep developing it, as people get on line to produce it we hope to have people actually funding the project through donations back to the commons in terms of developing further open source goods.
 
 
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//YJtgMbP5W30" frameborder="0" allowfullscreen></iframe></html>
 
 
* Message to Jason Fields from the [http://theurbanfarmingguys.com/ Urban Farming Guys]
** Ian produced [http://blog.opensourceecology.org/2011/09/lifetrac-frame-construction-video/ 7 minutes video] for the entire procedure to build the frame of the LifeTrac.
** Start writing the script and preparing your Kickstarter materials asap.
** Create a simple jig and I am hoping that even you guys will complete the whole tractor frame within hours.
 
 
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//rpY-DyUPYAA" frameborder="0" allowfullscreen></iframe></html>
 
 
* Dear True Fans and Supporters - Update
** about 42 days of construction. Foundation will be poured tomorrow. Excavation is done. Right now we are doing haying for the hay bales.
** Next week we will be full-time producing and laying CEB Bricks. SHonda is getting the CEB up. We go now to Sweiger to work on the Sawmill, hay cutter and pulverizers.
** Kauffman Foundation may would have 103,000 dollars for us, but I would like to see this money across the table, there are a lot of technical difficulties there.
** If we can show the straw bales and cut lumber from our own tree, that would be beautiful. We are finishing the Sawmill, we didn't get the blade till tonight, we will try to secure that.
** By the end of this week we aim to have 3 Tractors with 6 Power Cubes so we can start construction.
** [[Yoonseo Kang]] is coming this Thursday. And [[Ted Mosher]] anytime this week.
** Revenue streams from non-profit, real production, investors, loans.
 
 
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//rJ7J1wO1Do4" frameborder="0" allowfullscreen></iframe></html>
 
 
* Lifetrac Tracks design and jig comments - 3 links in-between, quality control - make sure the links are touching against the rebar.
* [http://www.youtube.com/watch?v=T-lP6aysYw8 Filling Tractor 2 with hydraulic fluid]
 
=10/02/11=
* Hay conditioner 101 - International 1086 Tractor - about 130HP, Hesston hay conditioner (a rotary cutter), 1 steel and 1 rubber roll. [http://www.youtube.com/watch?v=bTFJ0Y5KIQI In Action].
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//BWC8KZsgWck" frameborder="0" allowfullscreen></iframe></html>
 
 
* 1500 bales to be pressed - [http://www.youtube.com/watch?v=7YFhjf5U-V8 Meet the hay conditioner]
* [http://www.youtube.com/watch?v=E7g7LiYENyQ Beginning to clear vegetation], [http://www.youtube.com/watch?v=cMO7Qqc7GBc Starting the dozing]
* [http://www.youtube.com/watch?v=IGGlL8KWOFg Secondary cylinder mounting]
* Brianna explains [http://www.youtube.com/watch?v=HnFXzrwzsjg 1) Squaring CEB Drawer], [http://www.youtube.com/watch?v=OXSYWPXF8DY 2) Frame Jig], [http://www.youtube.com/watch?v=F9QAa7oHbiE 3) Fitting Cylinder], [http://www.youtube.com/watch?v=ZEhTowqOwlw 4) Frame and Roller Guide Holes], [http://www.youtube.com/watch?v=cwuQaTd2QZw 5) Frame Jig Turning], [http://www.youtube.com/watch?v=4H_mV4GB_iM 6) Frame Welding], [http://www.youtube.com/watch?v=7HDCZZSS7ww 7) Making Bolts], [http://www.youtube.com/watch?v=g56-gpn_q4Y 8) Shims Squaring Drawer], [http://www.youtube.com/watch?v=_pICqVpcZ8E 9) Squaring Hyd Cylinder], [http://www.youtube.com/watch?v=ZpZ0OUmGFIA 10) Squaring Hyd Cylinder], [http://www.youtube.com/watch?v=agDLLhOxaM8 11) Torching Sensor Holes].
* [http://www.youtube.com/watch?v=vcdISgZ1I4I Loading the Soil Pulverizer]
 
=10/01/11=
* [http://www.youtube.com/watch?v=KdEZJgpJYFQ Nearly finished grading]
* [http://www.youtube.com/watch?v=aZNXzggxjHo Clearing off vegetation]
 
=9/30/11=
* Column foundation forms - a laser level would be useful that sense out an array of lines across the whole field so that we don't have to mess with the water level.
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//RXLGxzXTfCs" frameborder="0" allowfullscreen></iframe></html>
 
 
* Hammering Foundation pads - http://www.youtube.com/watch?v=pfcSDbkpJEw
 
=9/28/11=
 
{| class="wikitable sortable" border="1"
|+ HabLab
|-
| Excavation started<br/> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//J7VzO8MJODQ" frameborder="0" allowfullscreen></iframe></html> || Gravel trucks and spreading<br/> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//5nQo7-ORQPo" frameborder="0" allowfullscreen></iframe> <iframe width="300" height="203" src="https://www.youtube.com/embed//uK3gUh89VhI" frameborder="0" allowfullscreen></iframe></html>
|-
| Excavation <br/> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//vymwnvT-JBA" frameborder="0" allowfullscreen></iframe></html>  || Bulldozing<br/> <html><iframe width="300" height="203" src="https://www.youtube.com/embed//XLU3ctka5c8" frameborder="0" allowfullscreen></iframe> <iframe width="300" height="203" src="https://www.youtube.com/embed//2g2QSMYvniE" frameborder="0" allowfullscreen></iframe> </html>
|-
|}
 
 
* $60k construction grant is in
<html><iframe width="300" height="203" src="https://www.youtube.com/embed//tGV4-EQcXqY" frameborder="0" allowfullscreen></iframe></html>
 
* CEB vault prototype [http://www.youtube.com/watch?v=ngs-WeJMhic 1] and [http://www.youtube.com/watch?v=Zv3YaoHf9r0 2]
* [http://www.youtube.com/watch?v=ucgUYWc2F3U Cat D7 bulldozer fuel consumption] - 10 gal/hr, 90 gal fuel tank
* [http://www.youtube.com/watch?v=OGWqhubZGzg Monday midnight oil update] - shipping 2 Power Cubes, Bulldozer came.
 
[[Category:Logs]]
[[Category:Factor e Farm Logs]]

Revision as of 00:11, 31 December 2011

Archive

12/24/11

  • CEB Operational Safety--An Introduction*

  • Proper safety for operating the CEB
  • Safety is critical for this BETA RELEASE of the CEB Press despite 150+ hours of field testing
  • Recommend to work in pairs or teams, proper protection needed, heavy-machine experience needed
  • Step-by-Step safety instructions from Marcin for anyone operating the CEB Press



  • Lifetrac Tractor Operation, Safety, Maintenance, Troubleshooting, and Repair Introduction*

  • Proper safety for operating the Lifetrac Tractor
  • Safety is critical for this BETA RELEASE of the Lifetrac despite 150+ hours of field testing
  • Recommend to work in a pair or as a team--not alone, proper protection needed, heavy-machine experience needed
  • Step-by-Step safety instructions from Marcin for anyone operating the Lifetrac
  • Basic Tractor operation techniques


  • Soil Pulverizer Operation, Safety, Maintenance, Troubleshooting, and Repair Introduction*

  • Proper safety for operating the Soil Pulverizer
  • Safety is critical for this BETA RELEASE of the Soil Pulverizer despite 150+ hours of field testing
  • Recommend to work in a pair or as a team--not alone, proper protection needed, heavy-machine experience needed
  • Step-by-Step safety instructions from Marcin for anyone operating the Soil Pulverizer
  • Basic Soil Pulverizer operation techniques and best practices



  • Power Cube Operation, Safety, Maintenance, Troubleshooting, and Repair Introductions*

  • Proper safety for operating the Power Cube
  • Safety is critical for this BETA RELEASE of the Power Cube despite 150+ hours of field testing
  • Recommend to work in a pair or as a team--not alone, proper protection needed, heavy-machine experience needed
  • Step-by-Step safety instructions from Marcin for anyone operating the Power Cube
  • Basic Power Cube operation techniques and best practices


  • Construction in Progress - Results of 2011*

  • Summary of results for 2011
  • Significant CEB construction completed in 2011 with HabLab (which is almost complete)
  • Prototyping being done in workshop
  • Explanation, philosophy, materials, outcomes and successes of CEB Construction
  • Successful use of CEB Press and Soil Pulverizer
  • Unsuccessful with cinder-block replacement pressing with reject Lime
  • Explanation of overall brick-pressing, brick-laying and mortaring experience and construction techniques discovered while building the HabLab



12/23/11

  • Quick Attach Wheel Assembly Walk-through*

  • Walk-through explanation of detachable quick-attach wheel motor unit for heavy-duty machines
  • motor, bolts, structure, hub, splined, shaft, couplers, collars, washers, bearings, Lifetrac frame,



12/22/11


12/21/11

  • Quick Attach Wheel 1*



12/19/11


Click here for Marcin Log 9/26/11 - 12/16/11

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Marcin_Log&oldid=50487"