Cold Saw/V1 Design Files/Shaft Block: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
*'''Mount Hole Diameter: | *'''Mount Hole Diameter: 10.5mm then M12x1.75 Tap''' | ||
*'''Mount Hole Depth: 50mm''' | *'''Mount Hole Depth: 50mm''' | ||
Revision as of 20:21, 4 June 2012
Shaft Block
- Length: 76.2mm
- Width: 50.8mm
- Height: 150mm
- Shaft Hole Diameter: 31.8mm
- Shaft Hole Spacing Along Length: Centered
- Shaft Hole Spacing Along Height: 115mm
- Mount Hole Diameter: 10.5mm then M12x1.75 Tap
- Mount Hole Depth: 50mm
- Mounting Rectangle: 30mm x 55mm
- Mount Rectangle Spacing: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF