TAZ: Difference between revisions
Jump to navigation
Jump to search
| Line 41: | Line 41: | ||
==Unpacking== | ==Unpacking== | ||
*0.5mm nozzle - <html><iframe width="210" height="160" src="https://www.youtube.com/embed//Lu0RD-J1PYQ" frameborder="0" allowfullscreen></iframe></html> | *0.5mm nozzle - <html><iframe width="210" height="160" src="https://www.youtube.com/embed//Lu0RD-J1PYQ" frameborder="0" allowfullscreen></iframe></html> | ||
*Power supply - Nice! 3D printed, sophisicated terminal cover and on/off switch for power supply.[[Image:tazunpacking.jpg]] | |||
Revision as of 03:15, 23 May 2013
Intro
TAZ is Lulzbot's latest model of their open source 3D printer.
Manual: http://download.lulzbot.com/TAZ/documentation/current/
Buy: http://www.lulzbot.com/?q=products/taz-3d-printer
OSE TAZ
Operation
- Download Slic3r - http://www.slic3r.org - The Slic3r software is the first tool in the chain of 3D printing software. Slic3r uses commonly used .STL files to create .gcode files.
- Download Pronterface - the actual printer controller into which you feed the Python. Will try the nutcracker first, or the classic shotglass for speed.
- On Ubuntu - see the notes at https://github.com/kliment/Printrun for installing Printrun.
- I needed to do: sudo apt-get install python-serial python-wxgtk2.8 python-pyglet
- Now doubleclicking on pronterface and running it (python script) opens it up.
Tip
one tip- for now your usual work flow will be: Use Slic3r to cut the *.stl model, then export the model to a *.gcode file. Once you have the .gcode file open Pronterface and load the *.gcode file.
Shot Glass
Why is this on its side? In Slic3r, it also appears on side;
I try to load it into Pronterface. First generate gcode.
Octopus
Jeff jebba and orias #reprap recommend Octopus: File:Octopus.gcode. Here it is in Pronterface:
Unpacking
- 0.5mm nozzle -
- Power supply - Nice! 3D printed, sophisicated terminal cover and on/off switch for power supply.
