Tractor Construction Set Critical Modules: Difference between revisions
Jump to navigation
Jump to search
(→Review) |
|||
| Line 9: | Line 9: | ||
*Make XYZ corner on top of frame | *Make XYZ corner on top of frame | ||
*Make microtrac tracks longer so there is a lower number of them | *Make microtrac tracks longer so there is a lower number of them | ||
*Use 1" instead of 3" pivot | |||
* | |||
==Truck== | |||
*Close off bed of Truck - needs a gate | *Close off bed of Truck - needs a gate | ||
Revision as of 15:26, 10 June 2013
Review
Microtrac
- Cross stagger the wheels
- Make XYZ corner on top of frame
- Make microtrac tracks longer so there is a lower number of them
- Use 1" instead of 3" pivot
Truck
- Close off bed of Truck - needs a gate
- Stagger microtrac wheels
- Make pivot supported by 4 corners of Frame Module
- Modularize cab
- Modularize pivot unit - right now it's one with 2 degrees of freedom - make 2 with 1 degree of freedom for modularity.
- modularize engine unit in truck
- Need tight clamp-on wheel mounts hubs - with Keyway - truck
Example: