3 Inch Wheel Hub: Difference between revisions
Jump to navigation
Jump to search
Nottern link (talk | contribs) No edit summary |
|||
| Line 13: | Line 13: | ||
*Weld tabs on it for the 3/4" bolt hole | *Weld tabs on it for the 3/4" bolt hole | ||
*Weld one half of the keyed coupler into the rest of the metal wheel | *Weld one half of the keyed coupler into the rest of the metal wheel | ||
Ok, I'll try something following this--[[User:Nottern link|Nottern link]] ([[User talk:Nottern link|talk]]) 06:08, 16 June 2013 (CEST) | |||
=Samples to Build From= | =Samples to Build From= | ||
[[File:3inchhub.png|100px]] | [[File:3inchhub.png|100px]] | ||
Revision as of 04:08, 16 June 2013
Note: this will be attached to the wheel from Monica Log
- Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.:
Design Rationale 1
- Take a very thick keyed coupler - say start with 3" solid coupler, 1/2" keyway
- Slit it in half
- Weld tabs on it for the 3/4" bolt hole
- Weld one half of the keyed coupler into the rest of the metal wheel
Ok, I'll try something following this--Nottern link (talk) 06:08, 16 June 2013 (CEST)
Samples to Build From
