The Spark Build

Task Allocation

Main

• List people and allocate tasks

1. James - cube
2. Jason - cube
3. Tom - cube
4. James' Daughter
5. Katie
6. Audrey
7. Gary
8. Rob
9. Nat
10. Rob
11. Dante
12. Durante
13. Leandra
14. Lucas
15. Jordan
16. Cory
17. Ian
18. Siku
19. DJ
20. Emily

• Shop setup
• Parts run

Shopping List

• Lock washers
• Bandsaw blade
• Cutoff wheels- 14"

Tasks:

• Take off wheels
• Create cut lists
• Cutting materials
• Take off tracks
• Remove power cube
• Get blocks and stand tractor on blocks
• Shop signs
• Eyewash
• Generate cut list
• Generate procedures
• Build Power Cube
• Workshop inventory
• Tool prep
• Create cannibalization log
• Work instructions
• Graphical work instructions

Quality Control

• Download File:Cab and Loader Arms 12pm Jul 11.skp
• Loader forearm stability
• Force on arm lift cylinder mounting
  • 9 degree cylinder angle means 9400 lbs lift force
• Foot pedal detail
• Valve 1 mounting plate detail
• Valve 2 mounting plate detail
• Foot pedal detail
  • Pin tight with lever
• Seat mounting
• Wheel shaft procedure
• Loader down pressure
• Bolts clearing everywhere
• Bolting feasibility everywhere
• Build order correct for each moduleo
• Bottom cylinder mounting spacer means can't bolt the tubes together as is. Solution: bore out holes or move mounting 4" forward and wheel 4" forward and use a x8" plate for mounting
• 1/2" stickout on wheel me
• Narrower cab by 8" on each side to 32 inch door and 40" wide cab, to save 13' of tubing ($170)

Parts

First Choice

• 3 Spool, 25 gpm Motor Valve for Wheels, auxiliary implements, and turning - [1]. Needs Power Beyond Sleeve - [2]
• 25 GPM Joystick valve - [3]
• [4] hoses - [4]
• [2] hoses - [5]

Other Options

• 25 GPM Joystick valve - [6]
• 45 GPM auxiliary motor valve - [7] - note: motor auxiliary goes before the joystick loader valve.
  • Fittings - SAE 16 in,out,work - need 3 of [8] and 1 of [9]
• 25 GPM auxiliary motor valve - [10]