CEB Press/Current Downloads

Overview

This page contains a list of the most up to date files that have been uploaded to the OSE Wiki relating to the CEB Press fabrication. This list is an attempt to organize the latest critical CAD data, spreadsheets, code, etc for the current revision into one location.

The latest documentation for the CEB Press is currently available for the revision 6 or "CEB Press prototype VI". There will most likely be errors that will need correcting. Please note any errors in the discussion section.

CAD Data

Metal

• This zip files contains 2d pdf files for CEB 6 parts and assemblies, each sub-assembly has it's own pdf.
  • File:CEBVI Fab Drawings.pdf - 65 pages of drawings
  • File:CEBVI 2D DRAWING PDF.zip - may not work on some computers

• Step file for complete 3d model (CEB 6) without electronics
  • File:01-001-00-6.stp

• NEW Freecad 3d model with proper grouping
  • File:CEBPressJuneGroup.fcstd

• This zip file is the original Alibre design files, 3d and 2d, that was used to make the step files and pdf files.
  • File:CEBVI ALIBRE FILES.zip

CNC Metal Cutting Files

• These files are dxf files that can be easily imported into CNC cutting machines (i.e. laser-cutter, waterjet, plasma, or torch cutter). These files were originally introduced in the OSE Christmas Gift to the World 2012. Having these files machine cut would save a large amount of time that would otherwise be spent sawing material and drilling holes. These parts are blanks that are welded together (in most cases) in order to make the parts detailed in CEBVI.ZIP listed above.
  • File:.5IN STEEL LIBRARY.dxf - 1/2" steel
  • File:.125 STEEL LIBRARY.dxf - 1/8" steel
  • File:.25 STEEL LIBRARY.dxf - 1/4" steel

Plastic - MTU Remote Prototyping

• STL files for parts that were designed to be 3d printed
  • File:01-222-00-2.STL
  • File:01-238-00-0.STL

Part 1:

Sourcing of 3D Prints

$15 per piece from http://Sculpteo.com : but scale is off by about a factor of 2

Electronics

• 2012 electronics; however, latest versions have gone back to using the arduino.
  • Detroit_Fab_Lab_Solenoid_Driver_v4

• • controller pics[1]

Hydraulics

• • Hydraulic Design

BOM

• Master bill of materials.
  • File:01-001-00-6 BILL OF MATERIALS.ods

• Electronics BOM (May 2013)
  • [2]

Software

• this is the program file that runs on the Arduino micro controller that is installed on the CEB Press.

File:CEBOperationTest.ino