The Liberator Full Release - Mechanical Fabrication: Difference between revisions
Jump to navigation
Jump to search
(→Frame) |
(→Frame) |
||
| Line 1: | Line 1: | ||
=Frame= | =Frame= | ||
The | The frame consists of 7/16" thick, 6" wide u-channel. The frame is the same as that found in Prototype 1. You can use that as a fabrication guide. See the pictures 1-3 of [[CEB_Prototype_1_Fab]]. | ||
The Liberator Beta v2.0 is fabricated as follows. First, see the technical drawing for the overview: | |||
[[Image:framedxf.jpg|thumb]] | |||
==Structure== | ==Structure== | ||
==Cylinder Attachment== | ==Cylinder Attachment== | ||
Revision as of 20:40, 31 May 2010
Frame
The frame consists of 7/16" thick, 6" wide u-channel. The frame is the same as that found in Prototype 1. You can use that as a fabrication guide. See the pictures 1-3 of CEB_Prototype_1_Fab.
The Liberator Beta v2.0 is fabricated as follows. First, see the technical drawing for the overview:
